Engine Really hot smokin

  • 1wyatt2
  • 1wyatt2's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

Engine Really hot smokin

04 Mar 2011 09:58
#434942
So I have got my bike running, its an 1978 KZ 650, Im still having carb issues but, while the bike idles the motor seems to get really hot on the 3,4 side. Compression in Cylinder 3 is about 120 and all the others are around 150. There is smoke coming out of where the exhaust hooks to the 3rd cylinder, and it seems to get so hot smoke comes off the top of the engine. Oil leaks alittle from the valve cover, only on the very ends. Well I replaced a coil right after I got this bike, then I noticed after it was running and the bike getting so hot that the coil was oozing stuff out where the wires go into it. Also all my lights use to work but now, only my blinkers work, no more instrument cluster, or head light. Could this be valve clearance, bad rings, any ideas thanks???????????????
WYATT

Please Log in or Create an account to join the conversation.

  • PLUMMEN
  • PLUMMEN's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7983
  • Thanks: 104

Re: Engine Really hot smokin

04 Mar 2011 10:10
#434946
check your valve clearances to make sure theyre all in ball park of where they need to be,then check compression again.
check wiring under tank to make sure no wires got knocked loose when changing coil. B)
if you are leaving the bike idling any length of time while checking things turn a fan on the motor to keep it from overheating B)
Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

  • tinlizzie37
  • tinlizzie37's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 149
  • Thanks: 1

Re: Engine Really hot smokin

04 Mar 2011 10:26
#434951
Hi Wyatt, Looks as if your tach seal is leaking and dropping oil onto the head or exhaust. Plummen is right about letting the bike run without a cooling fan. These bikes are "air-cooled". Valve clearance should be checked as well as the carbs. They usually cause a lean running bike when they are blocked. Get a factory manual and it can help you out quite a bit, by trouble shooting the problems you are having. Everything has to be operational for these bikes to run good. Check the timing and points gap. Check you charging system coils. The manual shows you how to do it easily. Good luck, Bob
Bob KZ 650 E1, En 450

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum