Valve clearance stock engine

  • nads.com
  • nads.com's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 993
  • Thanks: 20

Valve clearance stock engine

07 Mar 2011 00:00 - 07 Mar 2011 00:03
#435801
What is the normal valve clearance for stock engines?

It's been awhile since I installed .407 (small) cams.
The clearance was not alot. The standard is .050in and .075ex. (what you need)

So I'm thinking when big cams .435 or such are put in and degreed to the popular dinky centers, there can't be much valve clearance left.

So did I read my clearance wrong or

Are you guys grinding into the piston pockets?

now talk :angry:

NO kidding around.

:woohoo:

And is taking .050 off the head surface going to be too much compression (OH boy) this ones gonna wake up the heard :ohmy:

MOOOOOOOOOOOOOOO!
Last edit: 07 Mar 2011 00:03 by nads.com.

Please Log in or Create an account to join the conversation.

  • nads.com
  • nads.com's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 993
  • Thanks: 20

Re: Valve clearance stock engine

07 Mar 2011 00:09
#435802
I feel like I just asked my little brother to find our way home. :laugh: Will make you guys yet ;)

Dirty little secrets, dirty little lies,

stinkin rotten horny flies,

crawling in and out of zzzzzzzzzzz
zzzzzzzzzz
zzzzzzzzzzzzzz, ZT!

Please Log in or Create an account to join the conversation.

  • TomW
  • TomW's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep the blue side up.
  • Posts: 502
  • Thanks: 52

Re: Valve clearance stock engine

07 Mar 2011 00:17 - 07 Mar 2011 00:20
#435803
Standard clearance for stock KZ1000 is .002" - .004" int & ex. If you want mm do the math. As for milling heads, see my thread titled "head milling" about a week ago. Lots of opinions there.
kzrider.com/index.php?option=com_kunena&...ew&catid=2&id=433632
'78 KZ1000B2 LTD stock + Vetter Fairing & luggage
'91 ZG1200B5 Voyager XII, stock
Last edit: 07 Mar 2011 00:20 by TomW. Reason: added link

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Valve clearance stock engine

07 Mar 2011 06:24
#435816
nads.com wrote:
What is the normal valve clearance for stock engines?
It's been awhile since I installed .407 (small) cams.
The clearance was not alot. The standard is .050in and .075ex. (what you need)

So I'm thinking when big cams .435 or such are put in and degreed to the popular dinky centers, there can't be much valve clearance left.
So did I read my clearance wrong or
Are you guys grinding into the piston pockets?
now talk :angry:
NO kidding around....

As to valve clearance --- Back to basics ---

Clearance gap is measured off-cam which should imo be the same regardless of cam profile.
It assures full valve closure at normal operating temp, regardless of how far the cam is opening the valve.
Cold gap clearance diminishes as the engine warms.

The idea is to avoid valve contact with each other or hitting a piston as the crank rotates.
Of concern are matters of valve lift and cam timing and tdc piston height/shape/relief (and maybe some other stuff happily left to Larry C. and more proficient brethren).

FSM says 0.05 ~ 0.1 mm cold clearance for Z1 ~ KZ1000, both intake and exhaust valves.
Some elect up to 0.15 mm, especially for exhaust.

This is true Gospel, straight from the Fat Lady's lips. :cheer:

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • nads.com
  • nads.com's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 993
  • Thanks: 20

Re: Valve clearance stock engine

07 Mar 2011 17:37
#436001
Pistron to walve clearance. Picke the wrong week to change meds, :woohoo: My buddys in jail, I usaully have him stick his finger in the hole and turn over the motor.
He yells (I got a sound monitor for that), then I ask him on a scale of one to ten how bad it hurt. Jot down a few notes and hmm.

Problem is he's running out of fingers and he's lost his voice. SO... I needed and alternative method and changed meds! :laugh: I'm so happy :laugh: I stil don't know anything :blink:

Cept I found a strange dog in my back yard.
Had no hair at all, his hair was layin all over the yard.

I noticed he was missing some toe nails, had to be my dog cuz I used him for valve clearance once.

Found a jar of my nad.s mayonaise in the yard.

Empty! That son of

Wondered what could be in it, heck it's not mayo it's for hair removal!

And I got the stuff with the hairy ape picture on it too!

No wonder I,ve had trouble processing!

I've had to allow 30min to tie my shoes, 5min to reply to complex yes or no questions, and the dreams were3d and not empty.

The deaf dumb and blind boy.


He plays mean pinball, but I've seen some mean black eyes on him night after a couple drinks, Still wanna win the pot how many times his nose been broke.

Keeps saying I'm doing it.
I think that's an excuse.

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: Valve clearance stock engine

07 Mar 2011 17:48
#436007
nads.com wrote:
Pistron to walve clearance. Picke the wrong week to change meds, :woohoo: My buddys in jail, I usaully have him stick his finger in the hole and turn over the motor.
He yells (I got a sound monitor for that), then I ask him on a scale of one to ten how bad it hurt. Jot down a few notes and hmm.

Problem is he's running out of fingers and he's lost his voice. SO... I needed and alternative method and changed meds! :laugh: I'm so happy :laugh: I stil don't know anything :blink:

Cept I found a strange dog in my back yard.
Had no hair at all, his hair was layin all over the yard.

I noticed he was missing some toe nails, had to be my dog cuz I used him for valve clearance once.

Found a jar of my nad.s mayonaise in the yard.

Empty! That son of

Wondered what could be in it, heck it's not mayo it's for hair removal!

And I got the stuff with the hairy ape picture on it too!

No wonder I,ve had trouble processing!

I've had to allow 30min to tie my shoes, 5min to reply to complex yes or no questions, and the dreams were3d and not empty.

The deaf dumb and blind boy.


He plays mean pinball, but I've seen some mean black eyes on him night after a couple drinks, Still wanna win the pot how many times his nose been broke.

Keeps saying I'm doing it.
I think that's an excuse.
:woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • stonemaster
  • stonemaster's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Valve clearance stock engine

07 Mar 2011 18:35
#436017
Patton wrote:
nads.com wrote:
What is the normal valve clearance for stock engines?
It's been awhile since I installed .407 (small) cams.
The clearance was not alot. The standard is .050in and .075ex. (what you need)

So I'm thinking when big cams .435 or such are put in and degreed to the popular dinky centers, there can't be much valve clearance left.
So did I read my clearance wrong or
Are you guys grinding into the piston pockets?
now talk :angry:
NO kidding around....

As to valve clearance --- Back to basics ---

Clearance gap is measured off-cam which should imo be the same regardless of cam profile.
It assures full valve closure at normal operating temp, regardless of how far the cam is opening the valve.
Cold gap clearance diminishes as the engine warms.

The idea is to avoid valve contact with each other or hitting a piston as the crank rotates.
Of concern are matters of valve lift and cam timing and tdc piston height/shape/relief (and maybe some other stuff happily left to Larry C. and more proficient brethren).

FSM says 0.05 ~ 0.1 mm cold clearance for Z1 ~ KZ1000, both intake and exhaust valves.
Some elect up to 0.15 mm, especially for exhaust.

This is true Gospel, straight from the Fat Lady's lips. :cheer:

Good Fortune! :)

Kawasaki charged to upper range fron.1 to .15 in a supplemental

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Valve clearance stock engine

07 Mar 2011 20:13
#436041
I don't have the answer to Nads' question as it relates to ideal minimum clearance between the valve and piston on a running engine.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: Valve clearance stock engine

07 Mar 2011 20:19
#436042
check vendor listing to find qualified tech tips from our advertisers! stay on topic/meds nads! :woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: Valve clearance stock engine

10 Mar 2011 15:02 - 10 Mar 2011 15:05
#436849
Piston to valve clearance ( minimum ):
KZ / Z1 - 0.050 Int., 0.075 Ex.

Valve to valve clearance ( measured on the seat ):
KZ / Z1 - .200 u can get away with .190"" but the less u have, the wider u have to run your lobe centers. its hard to get low centers, but that depends on what cams u run too.
i have run .424" lift cams at 110 centers with .190" V to V. at .200" i can run 108 lc.

i would not mill the head unless u know exactly what u are doing.
if u do your valves will now be even closer to the pistons, u will not meet the min spec.and u will have too much comp for pump gas with aftermarket pistons.
if u buy 10.25:1 pistons u will have all the compresion u need. and more and u will need more octane.
u are better off milling your cyl deck to bring your squish clearance down to .040".i am running 200psi cyl comp.
then again this all depends on what u plan to do with this motor. B)
u said with a stock eng. but u would not be able to run .435" lift cams with stick pistons. u would have to fly cut the pistons and it would likely weeken the piston too much.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 10 Mar 2011 15:05 by mark1122.

Please Log in or Create an account to join the conversation.

  • nads.com
  • nads.com's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 993
  • Thanks: 20

Re: Valve clearance stock engine

12 Mar 2011 00:45
#437241
:blink: mark1122 wrote:
Piston to valve clearance ( minimum ):
KZ / Z1 - 0.050 Int., 0.075 Ex.

Valve to valve clearance ( measured on the seat ):
KZ / Z1 - .200 u can get away with .190"" but the less u have, the wider u have to run your lobe centers. its hard to get low centers, but that depends on what cams u run too.
i have run .424" lift cams at 110 centers with .190" V to V. at .200" i can run 108 lc.

i would not mill the head unless u know exactly what u are doing.
if u do your valves will now be even closer to the pistons, u will not meet the min spec.and u will have too much comp for pump gas with aftermarket pistons.
if u buy 10.25:1 pistons u will have all the compresion u need. and more and u will need more octane.
u are better off milling your cyl deck to bring your squish clearance down to .040".i am running 200psi cyl comp.
then again this all depends on what u plan to do with this motor. B)
u said with a stock eng. but u would not be able to run .435" lift cams with stick pistons. u would have to fly cut the pistons and it would likely weeken the piston too much.

10.25:1 pistons u will have all the compression

u need and more octane.

and I have 10.25 pistons and 155psi

And you are running 200lbs

:woohoo: I wanna be like you ;)
My cams aren't too big so I have all kinds of playing room. I never went for the big valve either (kindof gets in the way dont it) :woohoo:

Spoze after you saw what they did to your head, you don't agree with milling. :S

I'm only at 155 now and it could use 30psi more.

Why would milling the block be better? Just so the head stays stock? The piston height an advantage? Can the head mill do the same efficiency?

And I'm going get some clearance by grinding the pockets, that way I can use all centers short or long.

I had 220psi from carbon build up and ran on pump gas, any ignition timing could be used.

centers were 112.

I know I couldn't run short centers with that and not have a problem, that's just too much pressure.

My motor is smaller though, but I like to rev mine higher and have to run it like It has to be run for that I guess.

Please Log in or Create an account to join the conversation.

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Valve clearance stock engine

12 Mar 2011 03:42 - 12 Mar 2011 03:43
#437246
You don't want them loose,
You don't want them tight,
In between would be just right,
Are you just out of matches,
Or is the crack pipe broken,
To ride on the bus you must have a token,
I looked in chit chat but that thread has been nixed
If you follow these rules you'll get it all fixed.

RULES For Nads Valve Adjustment

If you can stick your finger between the cam and the bucket....too loose.

If you can't get your brain between the cam and the bucket.... too tight :woohoo: [that's a joke son]

:laugh:
Last edit: 12 Mar 2011 03:43 by larrycavan.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum