Uninstalling stock exhaust
- Omaha Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Uninstalling stock exhaust
07 Mar 2011 12:57
So I'm trying to un install my stock exhaust on my kz650sr. I have all of the bolts removed off of one side of the exhaust because I know that the whole exhaust setup is two pieces, but that middle connector pipe won't budge. I don't have much room to twist and pull. Any tips or advise? Thanks
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Uninstalling stock exhaust
07 Mar 2011 13:01
pull it all off together
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
Re: Uninstalling stock exhaust
07 Mar 2011 13:06
loosen and remove the head flanges and split flanges...dont loose em...
pull the back pegs/or hanger bolts that mount the mufflers...as jimbo said drop/pulling forward... the whole exhaust at once....the mid pipe under the bike will then fall apart or be able to pop free
pull the back pegs/or hanger bolts that mount the mufflers...as jimbo said drop/pulling forward... the whole exhaust at once....the mid pipe under the bike will then fall apart or be able to pop free
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- bgmrc
-
- User
-

Public
- Thanks: 0
Re: Uninstalling stock exhaust
07 Mar 2011 13:48
^^^ yep!!
just did that exact thing thing this past weekend..
wish i would of saw this thread first....would of knocked of 10min of messing around with it first!!
just did that exact thing thing this past weekend..
wish i would of saw this thread first....would of knocked of 10min of messing around with it first!!
Please Log in or Create an account to join the conversation.
- Omaha Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Re: Uninstalling stock exhaust
07 Mar 2011 18:35
After spraying with wd40 and taking off the bolt on the muffler which I didn't see at first, the whole system came off easily. Thanks for the replies
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
- Omaha Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Re: Uninstalling stock exhaust
08 Mar 2011 10:42
Got my 4-1 header on, just the header and DAMN it sounds good. Barks nicely and idles wicked. I really hope I wont have to rejet though. I want to leave the bike like this. Everything else is stock.
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
- Emberblade
-
- Offline
- User
-

Registered
- Posts: 52
- Thanks: 0
Re: Uninstalling stock exhaust
09 Mar 2011 10:46
Glad to hear you figured it out. When I pulled my pipes off they disintegrated into rust particles.
You shouldn't have to re-jet unless you decide to put on pod filters, you just have to readjust the mixture.
- E
You shouldn't have to re-jet unless you decide to put on pod filters, you just have to readjust the mixture.
- E
1982 KZ1000J ELR Clone
Please Log in or Create an account to join the conversation.
- Omaha Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Re: Uninstalling stock exhaust
10 Mar 2011 09:32 - 10 Mar 2011 09:33
Emberblade wrote:
How do I readjust the mixture?
Glad to hear you figured it out. When I pulled my pipes off they disintegrated into rust particles.
You shouldn't have to re-jet unless you decide to put on pod filters, you just have to readjust the mixture.
- E
How do I readjust the mixture?
1978 KZ650 SR D
Last edit: 10 Mar 2011 09:33 by Omaha Rider.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
