Clutch cable promblems! Help!
- Proxy
-
- Offline
- User
-

Registered
- 80% Human 20% Nuts/Bolts
- Posts: 510
- Thanks: 46
Re: Clutch cable promblems! Help!
10 Mar 2011 15:58
We had one like that and it was the little disk that holds the 3 ball bearings. It the ball seats worn. You would pull the clutch in and then snap. No clutch. And yes some manuals are wrong in their method of adjusting the clutch.
Take it from me cuz I found
If you leave it then somebody else is bound,
To find that treasure, that moment of pleasure,
When yours, it could have been.
1977 KZ650 B1 Being restored to original (Green)
1977 KZ650 B1 Original (Red) Sold
1977 KZ650 B1 Donor Bike for Parts
If you leave it then somebody else is bound,
To find that treasure, that moment of pleasure,
When yours, it could have been.
1977 KZ650 B1 Being restored to original (Green)
1977 KZ650 B1 Original (Red) Sold
1977 KZ650 B1 Donor Bike for Parts
Please Log in or Create an account to join the conversation.
- khawk912
-
Topic Author
- Offline
- User
-

Registered
- Posts: 59
- Thanks: 0
Re: Clutch cable promblems! Help!
10 Mar 2011 21:09
ended up following the wrong directions, made the adjustment and i have a clutch, well for now. the bike only has 1800 miles on it and hasnt really been ridin in about 20 years so ill find out soon enough.
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Last edit: 11 Feb 2013 13:23 by martin_csr.
Please Log in or Create an account to join the conversation.
- khawk912
-
Topic Author
- Offline
- User
-

Registered
- Posts: 59
- Thanks: 0
Re: Clutch cable promblems! Help!
11 Mar 2011 08:22
was exactly my experiance, i have the ball bearing set up as someone has mentioned and what i was doing was adjusting the bolt the wrong way. i had to actually loosen it creating pressure on the clutch push rod then tighten the locknut. now everything should be good. now its time to try and start it.
Do i just put gas in the top of the carbs ? how do i do a test run without putting the tank on
Do i just put gas in the top of the carbs ? how do i do a test run without putting the tank on
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Clutch cable promblems! Help!
11 Mar 2011 08:28
khawk912 wrote:
No. The fuel need to be supplied to the carbs through the fuel line.
Do i just put gas in the top of the carbs ? how do i do a test run without putting the tank on
No. The fuel need to be supplied to the carbs through the fuel line.
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- stonemaster
-
- User
-

Public
- Thanks: 0
Re: Clutch cable promblems! Help!
11 Mar 2011 08:47
khawk912 wrote:
find and old lawn mower/weed eater tank, clean it good and use that as you remote tank, it will come in handy later when u learn to do carb adjustments
Do i just put gas in the top of the carbs ? how do i do a test run without putting the tank on
find and old lawn mower/weed eater tank, clean it good and use that as you remote tank, it will come in handy later when u learn to do carb adjustments
Please Log in or Create an account to join the conversation.
- Proxy
-
- Offline
- User
-

Registered
- 80% Human 20% Nuts/Bolts
- Posts: 510
- Thanks: 46
Re: Clutch cable promblems! Help!
11 Mar 2011 08:53
Yep what Stonemaster said and put an inline shutoff and you have a motorcycle IV. Handy dandy thing!
Take it from me cuz I found
If you leave it then somebody else is bound,
To find that treasure, that moment of pleasure,
When yours, it could have been.
1977 KZ650 B1 Being restored to original (Green)
1977 KZ650 B1 Original (Red) Sold
1977 KZ650 B1 Donor Bike for Parts
If you leave it then somebody else is bound,
To find that treasure, that moment of pleasure,
When yours, it could have been.
1977 KZ650 B1 Being restored to original (Green)
1977 KZ650 B1 Original (Red) Sold
1977 KZ650 B1 Donor Bike for Parts
Please Log in or Create an account to join the conversation.
- khawk912
-
Topic Author
- Offline
- User
-

Registered
- Posts: 59
- Thanks: 0
Please Log in or Create an account to join the conversation.
- khawk912
-
Topic Author
- Offline
- User
-

Registered
- Posts: 59
- Thanks: 0
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Clutch cable promblems! Help!
11 Mar 2011 13:46
khawk912 wrote:
Nope --- the first screwing is to lightly seat the adjuster screw against end of the push rod, then second screwing is reverse 1/4 turn to create gap away from pushrod (assures no pressure on the pushrod), then tighten locknut.
[Click on image to enlarge view.]
Glad to hear it's up and running.
Good Fortune!
...had to actually loosen it creating pressure on the clutch push rod then tighten the locknut....
Nope --- the first screwing is to lightly seat the adjuster screw against end of the push rod, then second screwing is reverse 1/4 turn to create gap away from pushrod (assures no pressure on the pushrod), then tighten locknut.
[Click on image to enlarge view.]
Glad to hear it's up and running.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- khawk912
-
Topic Author
- Offline
- User
-

Registered
- Posts: 59
- Thanks: 0
Re: Clutch cable promblems! Help!
11 Mar 2011 14:13
well not up and running yet, and should i have adjusted the screw with the lever down?
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Clutch cable promblems! Help!
11 Mar 2011 14:37
khawk912 wrote:
Clutch cable should be floppy slack with no tension whatever (same as if broken or missing altogether) while the push rod adjustment is being performed.
And the handlebar clutch lever should not be squeezed during performance of the push rod adjustment, and may be just imagined as a dangling participle.
Good Fortune!
well not up and running yet, and should i have adjusted the screw with the lever down?
Clutch cable should be floppy slack with no tension whatever (same as if broken or missing altogether) while the push rod adjustment is being performed.
And the handlebar clutch lever should not be squeezed during performance of the push rod adjustment, and may be just imagined as a dangling participle.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
