am i totally screwed?
- Treewizard
-
Topic Author
- Offline
- User
-

Registered
- Posts: 84
- Thanks: 1
am i totally screwed?
13 Mar 2011 19:14
so i was finally putting the block back on and found this when i put the head on
these are what the intake cam journals look like
heres what the worst 3 of the exhaust journals look like
im racking my brain trying to think how the %#&@ this could have happened
and to remember if thats how they looked when i took the head off
is the head screwed? or could the engine have been running like this and been there the whole time? fyi there is no wear like this on the cams or the cam caps
any opinions? is it ok? can i fix it? and or do i need a new head?
these are what the intake cam journals look like
heres what the worst 3 of the exhaust journals look like
im racking my brain trying to think how the %#&@ this could have happened
and to remember if thats how they looked when i took the head off
is the head screwed? or could the engine have been running like this and been there the whole time? fyi there is no wear like this on the cams or the cam caps
any opinions? is it ok? can i fix it? and or do i need a new head?
1983 KZ 750 shaft
2002 ZRX 1200R
Raleigh NC
2002 ZRX 1200R
Raleigh NC
Please Log in or Create an account to join the conversation.
- Ktm181
-
- Offline
- User
-

Registered
- Man made it, so Man can fix it
- Posts: 71
- Thanks: 1
Re: am i totally screwed?
13 Mar 2011 19:26
Show someone who has experience with engines, they will recognize if these are new or old marks. From your pics they look very recently done.
Kt.
Kt.
Please Log in or Create an account to join the conversation.
- stonemaster
-
- User
-

Public
- Thanks: 0
Re: am i totally screwed?
13 Mar 2011 19:39
depends on your definition of totally screwed. those are totally screwed that i can tell you, it could have been worse, a shot of your cams would help the more knowledgeable ascertain your options,
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: am i totally screwed?
13 Mar 2011 22:05
I can't understand how any kind of failure could have put axial gouges (along the direction of the camshaft) into the journals. If steel shavings or garbage got in there the wear should have been radial lines or grooves.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- stonemaster
-
- User
-

Public
- Thanks: 0
Re: am i totally screwed?
14 Mar 2011 04:43
possibly when the cam was re-installed, the guide was not in position correctly on the left side of the cam, then when it was tightened down it was force into position with the pressure from tightening also shaving bit of metal off. the cam would then move slightly sideways and have small bits of metal in there to boot, ask me how i know this :woohoo:
Please Log in or Create an account to join the conversation.
- stonemaster
-
- User
-

Public
- Thanks: 0
Re: am i totally screwed?
14 Mar 2011 04:50 - 14 Mar 2011 06:15
hey man I see you from Raleigh , I'm up near ASU,
inspect the head for other damage, good luck
inspect the head for other damage, good luck
Last edit: 14 Mar 2011 06:15 by stonemaster.
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: am i totally screwed?
14 Mar 2011 05:06
Which engine is the head from?
Those marks can be smoothed and you should be OK. What do the cam journals themselves look like?
How the marks got there are pretty simple. Debris on the cams or the journals.
If it's a Kawasaki, it's either a 550, 650 or 750 head, the cams have to come out to shim the valves. It's possible some not so careful mechanic set the cams on a dirty surface and then put them back in without cleaning them.
I've seen this before....relax, it's fixable
Larry C
Those marks can be smoothed and you should be OK. What do the cam journals themselves look like?
How the marks got there are pretty simple. Debris on the cams or the journals.
If it's a Kawasaki, it's either a 550, 650 or 750 head, the cams have to come out to shim the valves. It's possible some not so careful mechanic set the cams on a dirty surface and then put them back in without cleaning them.
I've seen this before....relax, it's fixable
Larry C
Please Log in or Create an account to join the conversation.
- stonemaster
-
- User
-

Public
- Thanks: 0
Re: am i totally screwed?
14 Mar 2011 05:57
hmmm, I was told once upon a time that sanding/smoothing those want a good idea :ohmy:
Please Log in or Create an account to join the conversation.
- stonemaster
-
- User
-

Public
- Thanks: 0
Re: am i totally screwed?
14 Mar 2011 06:00 - 14 Mar 2011 06:18
sorry about the misinformation man, I apparently have been given false information in the past,
Last edit: 14 Mar 2011 06:18 by stonemaster.
Please Log in or Create an account to join the conversation.
- Treewizard
-
Topic Author
- Offline
- User
-

Registered
- Posts: 84
- Thanks: 1
Re: am i totally screwed?
14 Mar 2011 07:03
its a KZ750 1983 LTD
the cam journals on the cams look perfect, even the undersurface of the cam caps look awesome, makes me think its happened since the head came off. possibly when i took the head in to get shaved??
my other 'excuse to upgrade' option is to switch to a GPZ 750 head and cams, and part out my head and valves.... wich now having written that down akes even more sense :woohoo:
ill get a pic of the actual cams later
if i do part my head out would it be better to sell it together or in sets of valves, spings, cams etc?
thanks yall are very helpfull!
the cam journals on the cams look perfect, even the undersurface of the cam caps look awesome, makes me think its happened since the head came off. possibly when i took the head in to get shaved??
my other 'excuse to upgrade' option is to switch to a GPZ 750 head and cams, and part out my head and valves.... wich now having written that down akes even more sense :woohoo:
ill get a pic of the actual cams later
if i do part my head out would it be better to sell it together or in sets of valves, spings, cams etc?
thanks yall are very helpfull!
1983 KZ 750 shaft
2002 ZRX 1200R
Raleigh NC
2002 ZRX 1200R
Raleigh NC
Please Log in or Create an account to join the conversation.
- Stu Pidasole
-
- Offline
- User
-

Registered
- if you aint mod'n, you aint rock'n!
- Posts: 628
- Thanks: 1
Please Log in or Create an account to join the conversation.
- Treewizard
-
Topic Author
- Offline
- User
-

Registered
- Posts: 84
- Thanks: 1
Re: am i totally screwed?
14 Mar 2011 16:33
so i did just do an awesome cleaning, lapping, general replacing of any worn items ( various springs and retainers/ keepers ), new valve seals, and leveled the mating surface...
question 1
should i sell it at all and if yes..
better to sell the whole thing together, clearly documenting the damage or...
sell valves together, springs together, cams seperate etc.
and! ( iv always been a question bombarder )
what will a GPZ head and cams do for my performance? and would that require rejetting?
wow ,if anyone can answer all thoes questions i owe u a beer
:lol:
question 1
should i sell it at all and if yes..
better to sell the whole thing together, clearly documenting the damage or...
sell valves together, springs together, cams seperate etc.
and! ( iv always been a question bombarder )
what will a GPZ head and cams do for my performance? and would that require rejetting?
wow ,if anyone can answer all thoes questions i owe u a beer
:lol:
1983 KZ 750 shaft
2002 ZRX 1200R
Raleigh NC
2002 ZRX 1200R
Raleigh NC
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
