GPZ head on a LTD

  • Treewizard
  • Treewizard's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 84
  • Thanks: 1

GPZ head on a LTD

16 Mar 2011 16:41
#438446
so im going to fix my head side cam journals and see how it goes B)

in the mean time im wondering ...

will an 82 GPZ 750 head fit on my 83 750 LTD?

and if so will what kind of a boost in hp will i expect and will i need to re~jet?

thanks yall!
1983 KZ 750 shaft
2002 ZRX 1200R
Raleigh NC

Please Log in or Create an account to join the conversation.

  • T_Dub
  • T_Dub's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1441
  • Thanks: 26

Re: GPZ head on a LTD

16 Mar 2011 16:47
#438447
I would imagine that it would fit without any difficulty. You might have to re-jet, but I doubt it if you don't change your exhaust and airbox/carbs etc. I wouldn't say you'd see a big power increase, but probably a shift in the range due to the cams.

Biggest gains would be seen by replacing everything (carbs/head/4-1 exhaust. But even then the GPz only rated ten or so hp above the base 750.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler

Please Log in or Create an account to join the conversation.

  • jordan
  • jordan's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 965
  • Thanks: 5

Re: GPZ head on a LTD

16 Mar 2011 20:15
#438467
Correct me if im wrong somebody.... I built my 82 kz750 motor with 83 gpz750 head/cams a few years ago now but when i was searching and collecting parts i believe only the 83-85 gpz750's have the parts you will want. For sure its the 83-85 cams that you will want as earlier ones are the same as the kz and i think its the same for the head
KZ810 streetfighter kz/gpz/gsxr
1983 gs1100e
1979 KZ 1000 1428 dragbike project
1974 kawasaki H1 500 sold :(
1972 Kawasaki s2 350-parted on ebay :(
1973 Kawasaki s2 350-parted on ebay :(
1982 kz750(sold)
1978 kz650 hardtail(sold)
1975 honda xl250-sold
1971 yamaha R5-sold
1982 yamaha xs400

Please Log in or Create an account to join the conversation.

  • Treewizard
  • Treewizard's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 84
  • Thanks: 1

Re: GPZ head on a LTD

16 Mar 2011 20:57
#438473
ok thats the second time iv read that its the 83~85 GPZ heads/cams are any different from KZ..

is it true :dry:
1983 KZ 750 shaft
2002 ZRX 1200R
Raleigh NC

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: GPZ head on a LTD

16 Mar 2011 21:05
#438474
are pistons/combustion chambers compatable between the 2 years? B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: GPZ head on a LTD

17 Mar 2011 05:36
#438531
The 83 - 85 heads & cams are the best.

It's been a lot of years since I had an 83 750 head in my hands but I do know they had 35mm intake valves vs 34mm. I still have one of those valves in my box of test valves.

750 heads sometimes have chipped valve seats. So play it smart and have the combustion chamber decarboned [blasted] before you bolt one on the motor.

Larry C

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum