Oil passage o-rings..
- Bullitt03737
-
Topic Author
- Offline
- User
-

Registered
- Posts: 122
- Thanks: 0
Oil passage o-rings..
19 Mar 2011 16:50
I am about to reassemble the my 81 CSR 1000 and got the rings on the pistons and started preparing to drop the jugs down and then realized I did not have any of these new orings!!! I have managed to track down 3 NOS ones in the kansas city area... Does anybody have one I can buy off of them? I would like to get this together and move onto the next project!
If you can help at all please let me know!
thank you
Ian.
If you can help at all please let me know!
thank you
Ian.
1980 CSR 1000. New dyna Coils, Vacumn Less Petcock, Various Handle bars depending on the day, (Drag and Clubman.)
Please Log in or Create an account to join the conversation.
- GPz550D1
-
- Offline
- User
-

Registered
- Posts: 254
- Thanks: 22
Please Log in or Create an account to join the conversation.
- andy9802gt
-
- Offline
- User
-

Registered
- If it tastes that good, eat it yourself.
- Posts: 695
- Thanks: 19
Re: Oil passage o-rings..
19 Mar 2011 21:00
I think he's talking about the o rings at the base of the cylinders.
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
Please Log in or Create an account to join the conversation.
- GPz550D1
-
- Offline
- User
-

Registered
- Posts: 254
- Thanks: 22
Please Log in or Create an account to join the conversation.
- racer54
-
- Offline
- User
-

Registered
- Posts: 1902
- Thanks: 114
Re: Oil passage o-rings..
19 Mar 2011 22:23
If you are talking about the rings around the cylinders, I don't worry about them when I rebuild a motor. Never had a problem without them. The ones that go around the studs are another story though...you'd want those I would guess.
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110
Please Log in or Create an account to join the conversation.
- Bullitt03737
-
Topic Author
- Offline
- User
-

Registered
- Posts: 122
- Thanks: 0
Re: Oil passage o-rings..
20 Mar 2011 02:43
I am talking about the ones around the studs on the four corners of the jugs. I called every single kawi dealer in the 50 mile radius. No dice. So I jumped on ebay and bit the bullet and ordered a NOS one.
It will be here the middle of next week. If anything I gain more time to prep parts even more than I already have!
It will be here the middle of next week. If anything I gain more time to prep parts even more than I already have!
1980 CSR 1000. New dyna Coils, Vacumn Less Petcock, Various Handle bars depending on the day, (Drag and Clubman.)
Please Log in or Create an account to join the conversation.
- bls5050
-
- Offline
- User
-

Registered
- Posts: 34
- Thanks: 2
Re: Oil passage o-rings..
20 Mar 2011 09:02
I realize that this info may be a little late, seeing how you already ordered some, but if there is a Harbor Freight near you, they have a Viton O-ring kit that probably has the o-rings you need in it. It contains maybe 200 some-odd o-rings for about 14 dollars, metric sizes. An aircraft mechanic turned me on to that: apparently airplane motors use lots of o-rings,and they are really expensive from the factory.
1980 KZ1000st
Please Log in or Create an account to join the conversation.
- Bullitt03737
-
Topic Author
- Offline
- User
-

Registered
- Posts: 122
- Thanks: 0
Re: Oil passage o-rings..
20 Mar 2011 12:50
We where going to do something like that, and just use something close in size and shape. But the bike is really my dads and he finally let me tear it down and have the head worked over since it was burning oil. My dad insisted on using OEM parts and would not have it any other way, so thats what we did. Oh well I guess.
1980 CSR 1000. New dyna Coils, Vacumn Less Petcock, Various Handle bars depending on the day, (Drag and Clubman.)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
