Ignition Advancer question
- RunDog
-
Topic Author
- Offline
- User
-

Registered
- Posts: 23
- Thanks: 0
Ignition Advancer question
22 Mar 2011 20:19
1982 csr 1000 Carbs all rebuilt stage 3 with pods four into one and new dyna coils. As soon as I hit 5000 rpms she chokes out If I keep her pinned she just hesitates like when you hit redline. Could this be an ignition advancer problem: any ideas? Ive tried differant main jets does not matter
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: Ignition Advancer question
22 Mar 2011 20:27
Maybe but I doubt it.U dont need a stage 3 jet kit on an otherwise stock motor. I assume ur running BS34s? I am sure Larry C will tell u to sh--can the carbs,but I would go back to stock jetting and see what happens.Sounds like when u leave the pilot circuit for main jets that u are way too rich.Have u checked plugs after this happens and see what they look like? I would bet they are black.JMO.bj
Please Log in or Create an account to join the conversation.
- RunDog
-
Topic Author
- Offline
- User
-

Registered
- Posts: 23
- Thanks: 0
Re: Ignition Advancer question
22 Mar 2011 20:36
Last night I put stock main jet in and it did exact same thing What aftermarket carbs would you recomend for this bike
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: Ignition Advancer question
22 Mar 2011 20:48
I wouldnt put aftermarket carbs on it,but others here would.Have u pulled the ignition cover off and lubed the advancer mechanism? That might be of assistance to you.Checked timing?bj
Please Log in or Create an account to join the conversation.
- RunDog
-
Topic Author
- Offline
- User
-

Registered
- Posts: 23
- Thanks: 0
Re: Ignition Advancer question
22 Mar 2011 20:53
no How do I know if it is sticking the bike ran perfect last year No engine mods wouldnt timing afect other rpm ranges
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Ignition Advancer question
22 Mar 2011 21:41RunDog wrote: 1982 csr 1000 Carbs all rebuilt stage 3 with pods four into one and new dyna coils. As soon as I hit 5000 rpms she chokes out If I keep her pinned she just hesitates like when you hit redline....
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- RunDog
-
Topic Author
- Offline
- User
-

Registered
- Posts: 23
- Thanks: 0
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Ignition Advancer question
22 Mar 2011 23:03
After assuring proper function of the ignition timing advancer, would take a test run with the fuel tank cap ajar, to rule out the possibility of fuel starvation due to a clogged tank vent.
An ideal way to test operation of the advancer is by using a strobe-type timing light to observe the advancer quickly moving forward and backward as rpm is varied by blipping the throttle.
Good Fortune!
An ideal way to test operation of the advancer is by using a strobe-type timing light to observe the advancer quickly moving forward and backward as rpm is varied by blipping the throttle.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
