chopping exhaust?
- emanon
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
chopping exhaust?
24 Mar 2011 14:43
whats up to all!! just got a 1980 440 that im chopping up. ive seen alot of the stock exhaust that look like the tips have just been cut off. i like the look of that but is there any down falls to doing it that way? thanks.
Please Log in or Create an account to join the conversation.
- Proxy
-
- Offline
- User
-

Registered
- 80% Human 20% Nuts/Bolts
- Posts: 510
- Thanks: 46
Re: chopping exhaust?
24 Mar 2011 16:51
If you are talking about cutting off the mufflers and just running straights don't. Around here it is a $250 fine first time, $500 second time and $1500 for the third. There will be no fourth time. They will usually overlook a nice tuned aftermarket exhaust but straights gets banged. It also calls cops to attention.
Secondly it causes driver fatigue & deafness What?
Thirdly you will be playing with your carbs forever. Re-jetting and fiddling. Your powercurve will be altered. The engineers knew what they were doing and when people change things that drastically they are on their own and usually in my opinion regret it sooner or later.
It's your bike and your ears and your wallet and your wrenching time and they are your neighbors. But again it is your bike.
Secondly it causes driver fatigue & deafness What?
Thirdly you will be playing with your carbs forever. Re-jetting and fiddling. Your powercurve will be altered. The engineers knew what they were doing and when people change things that drastically they are on their own and usually in my opinion regret it sooner or later.
It's your bike and your ears and your wallet and your wrenching time and they are your neighbors. But again it is your bike.
Take it from me cuz I found
If you leave it then somebody else is bound,
To find that treasure, that moment of pleasure,
When yours, it could have been.
1977 KZ650 B1 Being restored to original (Green)
1977 KZ650 B1 Original (Red) Sold
1977 KZ650 B1 Donor Bike for Parts
If you leave it then somebody else is bound,
To find that treasure, that moment of pleasure,
When yours, it could have been.
1977 KZ650 B1 Being restored to original (Green)
1977 KZ650 B1 Original (Red) Sold
1977 KZ650 B1 Donor Bike for Parts
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: chopping exhaust?
24 Mar 2011 17:10 - 24 Mar 2011 17:12Proxy wrote: If you are talking about cutting off the mufflers and just running straights don't. Around here it is a $250 fine first time, $500 second time and $1500 for the third. There will be no fourth time. They will usually overlook a nice tuned aftermarket exhaust but straights gets banged. It also calls cops to attention.
Secondly it causes driver fatigue & deafness What?
Thirdly you will be playing with your carbs forever. Re-jetting and fiddling. Your powercurve will be altered. The engineers knew what they were doing and when people change things that drastically they are on their own and usually in my opinion regret it sooner or later.
It's your bike and your ears and your wallet and your wrenching time and they are your neighbors. But again it is your bike.
Eh, yeah. What he said! :laugh:
If you want a little deepeer/throatier sound, start with a couple extra holes drilled into the end of your baffle. Ride it, feel it. If you want to go further, than so be it. Baby steps will get you where you want to be - and if it is too far (fines), than you can simply plug and paint over a couple small holes.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Last edit: 24 Mar 2011 17:12 by TeK9iNe.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: chopping exhaust?
24 Mar 2011 17:43emanon wrote: whats up to all!! just got a 1980 440 that im chopping up. ive seen alot of the stock exhaust that look like the tips have just been cut off. i like the look of that but is there any down falls to doing it that way? thanks.
Which model KZ440? LTD? Standard? Belt?
What is condition of the stock pipes and mufflers? Are pics available?
Would advise against ruining a halfway decent exhaust system by altering it with any hacking or drilling. Many rusty looking systems may be readily restored to attractive serviceable condition by basic rust removal, a little sanding, and inexpensive rattle-can hi-temp black paint.
It's of course a different story if the existing system is already a rusted through pos. :lol:
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: chopping exhaust?
24 Mar 2011 19:35
Why not just remove the exhaust system entirely? The bike will sound nice and loud and will look really cool on a dark night. You may even be able to do away with the headlight. :evil:
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: chopping exhaust?
24 Mar 2011 19:36
What Proxy said plus this: if the stock pipes are in decent condition, they are worth money: more money than an aftermarket set. Sell the stock ones and buy a Kerker or VH or whatever you want. It will boost power a little, give a healthy sound and not get you arrested.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- emanon
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: chopping exhaust?
28 Mar 2011 02:19
thanks for the replies. i dont realy care about the sound. i just like the look of the strait pipe with no mufflers. im doing a bobber look and i dont like the way the aftermarket one have that big a$$ cone crap on the end of them (dont take it personal if u have them just not my style) i have aftermarket filters so im going to have to rejet it anyways. i just dont want it to do any damage to the motor, i guess thats what im asking lol
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: chopping exhaust?
28 Mar 2011 07:02Imo running without mufflers likely won't harm the engine, nor will running pods, provided the fuel mixture isn't critically lean (which applies regardless of intake and exhaust provisions). However, problematic carb tuning would be expected, especially with this model.emanon wrote: ...dont realy care about the sound...have aftermarket filters so im going to have to rejet it anyways. i just dont want it to do any damage to the motor....
Just my 2ยข.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Last edit: 11 Feb 2013 18:21 by martin_csr.
Please Log in or Create an account to join the conversation.
- dcil
-
- Offline
- User
-

Registered
- Posts: 9
- Thanks: 0
Re: chopping exhaust?
28 Mar 2011 17:18
New to Kaw's but in this instance a bike is a bike. No, it will not harm your engine assuming you have at least enough length on your pipe (roughly 16 inches) so that cold temperature air doesn't suck back in when the engine is first shut off. This can, and in most cases will cause a "burned valve".
It will lean your mixture "somewhat". Depending on the carb jetting. LEAN MIXTURE CAN KILL YOUR PISTONS!
My old Suzuki gs750 had cut exhaust. I bought a couple cheesey baffles off of ebay and put them in the pipe. No lean mixture, had the look your referring to, and was quieter than stock.
Hope this helps
It will lean your mixture "somewhat". Depending on the carb jetting. LEAN MIXTURE CAN KILL YOUR PISTONS!
My old Suzuki gs750 had cut exhaust. I bought a couple cheesey baffles off of ebay and put them in the pipe. No lean mixture, had the look your referring to, and was quieter than stock.
Hope this helps
Please Log in or Create an account to join the conversation.
- emanon
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: chopping exhaust?
31 Mar 2011 15:35
thanks for all the info. all i need are some tires and ill start the tunning prosses. ill keep u guys posted. thanks again.
Please Log in or Create an account to join the conversation.
- dejavoodo41
-
- Offline
- User
-

Registered
- Posts: 405
- Thanks: 14
Re: chopping exhaust?
31 Mar 2011 17:46 - 31 Mar 2011 18:31
I used to have an 81 GS450S that had pipes on it that had small diameter mufflers and turned out a little past the pegs. They had the short chopped look without being overly loud and were a slip on design. I don't remember what brand they were but I really liked them. I never had any problems with the cops in the 3 years I had the bike. You may want consider something like a short harley drag pipe or something along those lines.
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle
New Smyrna Beach, FL
New Smyrna Beach, FL
Last edit: 31 Mar 2011 18:31 by dejavoodo41.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
