nightmare part 6
- allen6634
-
Topic Author
- Offline
- User
-

Registered
- Posts: 48
- Thanks: 0
nightmare part 6
26 Mar 2011 09:01
well keeping up with the them i decided to name this post nightmare ,i got my new coils and wires yesterday ,so now i am waiting for the weather to break ,i hate to ask this question has anyone had any expireance with dyna products? is there any pit falls i can avoid? i hope i made a good choice in buying them i know my bike needed wires up grades , i would like to thank every one for the advice it didn't go to wast. now i am thinking about starting a new night mare. lol , i have thought about pods. and am on the fence about them ,
1983 kz 550 m
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: nightmare part 6
26 Mar 2011 09:38 - 26 Mar 2011 09:48allen6634 wrote: well keeping up with the them i decided to name this post nightmare ,i got my new coils and wires yesterday ,so now i am waiting for the weather to break ,i hate to ask this question has anyone had any expireance with dyna products? is there any pit falls i can avoid? i hope i made a good choice in buying them i know my bike needed wires up grades , i would like to thank every one for the advice it didn't go to wast. now i am thinking about starting a new night mare. lol , i have thought about pods. and am on the fence about them ,
The Dyna-S image below is for large fours, and IIRC the KZ650, maybe also KZ550, has an additional blue wire to the oil pressure switch.
Am very well-pleased with Dyna-S ignition, Dyna Coils (green 3 ohm), and Dyna solid core 7mm spark plug wires on both large Kaw fours.
Would read some of the former threads about pods.
Pods are excellent nightmare producers. Think Elm Street. :laugh:
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 26 Mar 2011 09:48 by Patton.
The following user(s) said Thank You: allen6634
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: nightmare part 6
26 Mar 2011 10:56
The Dyna S can be accidentally be hooked up in reverse, but with no consiquence other than the bike backfiring instead of starting - wont hurt anything.
Pods can be a real "nightmare" as some will say, which is why for inexperienced persons I recommend purchasing a DynaJet Jet Kit that is specifically for your bike with Pod filters.
It will not completely eliminate all headaches (probly be going back in the carbs 3-4 times) as apposed to starting from scratch, guessing jets and taking the carbs off and on all season long. :laugh:
Best of luck.
PS. Pods "can" make the lower speed transitions seem kinda funny at best (w/some bikes), and really only give you just a few HP at the very mid-top end range for power.
Pods can be a real "nightmare" as some will say, which is why for inexperienced persons I recommend purchasing a DynaJet Jet Kit that is specifically for your bike with Pod filters.
It will not completely eliminate all headaches (probly be going back in the carbs 3-4 times) as apposed to starting from scratch, guessing jets and taking the carbs off and on all season long. :laugh:
Best of luck.
PS. Pods "can" make the lower speed transitions seem kinda funny at best (w/some bikes), and really only give you just a few HP at the very mid-top end range for power.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
The following user(s) said Thank You: allen6634
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: nightmare part 6
26 Mar 2011 11:16 - 26 Mar 2011 11:18
Maybe these will help, maybe not...
Dyna Coil Installations
Dyna DS2-1 Installation
I've been running min here in AZ (115*F summers) with no issues to date... Set them up right for optimum performance (timing), always there to perform when ya need it.
OMR
Dyna Coil Installations
Dyna DS2-1 Installation
I've been running min here in AZ (115*F summers) with no issues to date... Set them up right for optimum performance (timing), always there to perform when ya need it.
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 26 Mar 2011 11:18 by Old Man Rock.
The following user(s) said Thank You: allen6634
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
