Interpreting cylinder pressure
- jjack010
-
Topic Author
- Offline
- User
-

Registered
- Posts: 42
- Thanks: 3
Interpreting cylinder pressure
29 Mar 2011 23:58 - 30 Mar 2011 00:26
After owning my 74 Z1 for over a year now, I decided to do a compression test. At the moment I'm trying to diagnose a problem that I believe is in the carbs. So while I'm at it I've decided to completely go through the tune up/ maintenance section of the manual. I don't know many details of the engine from the previous owner. He said it had a big bore kit. He couldn't even tell me what size.
Here are my numbers from the compression test...........
1 - 210psi
2 - 190psi
3 - 200psi
4 - 210psi
I have 2 shop manuals and neither one gives specifics on the Z1. From what I've read, normal pressure is 130-160 psi. Can anybody confirm that?
With those readings, I'm really curious whats been done to the bike. I would like to find out what cams are in it. How do I tell what piston kit has been installed?
Here are my numbers from the compression test...........
1 - 210psi
2 - 190psi
3 - 200psi
4 - 210psi
I have 2 shop manuals and neither one gives specifics on the Z1. From what I've read, normal pressure is 130-160 psi. Can anybody confirm that?
With those readings, I'm really curious whats been done to the bike. I would like to find out what cams are in it. How do I tell what piston kit has been installed?
Attachment z1sidejpeg.jpg not found
1974 Kawasaki Z1
Central Texas
Central Texas
Last edit: 30 Mar 2011 00:26 by jjack010.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Interpreting cylinder pressure
30 Mar 2011 00:15 - 30 Mar 2011 00:45
Per KHI FSM:
Z1 stock compression is 145 psi
Service limit is 100 psi.
Less than 14 psi difference between any two cyl.
Good Fortune!
Z1 stock compression is 145 psi
Service limit is 100 psi.
Less than 14 psi difference between any two cyl.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 30 Mar 2011 00:45 by Patton.
Please Log in or Create an account to join the conversation.
- jjack010
-
Topic Author
- Offline
- User
-

Registered
- Posts: 42
- Thanks: 3
Re: Interpreting cylinder pressure
30 Mar 2011 00:25
One of these shop manuals states that as long as there is not a difference of 10% or more between any 2 cylinders, they should be ok. True or false?
1974 Kawasaki Z1
Central Texas
Central Texas
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Interpreting cylinder pressure
30 Mar 2011 00:26
nice z1!

have you checked the valve clearances to see if you can even up the numbers a little?
judging from your numbers and lack of a kick starter id say shes packing a lot of compression and fairly short duration on the cams.
have you checked the valve clearances to see if you can even up the numbers a little?
judging from your numbers and lack of a kick starter id say shes packing a lot of compression and fairly short duration on the cams.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- jjack010
-
Topic Author
- Offline
- User
-

Registered
- Posts: 42
- Thanks: 3
Re: Interpreting cylinder pressure
30 Mar 2011 00:30 - 30 Mar 2011 00:39
Thanks.
I hope your right. Well, maybe. I rode it from time to time last year. Basically what I found out is that she didn't like to putt around town or cruise the country roads. But by god, if I had a fist full of throttle, all was well. LOL
I'm would like to make her happy with both.
I hope your right. Well, maybe. I rode it from time to time last year. Basically what I found out is that she didn't like to putt around town or cruise the country roads. But by god, if I had a fist full of throttle, all was well. LOL
I'm would like to make her happy with both.
1974 Kawasaki Z1
Central Texas
Central Texas
Last edit: 30 Mar 2011 00:39 by jjack010.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Interpreting cylinder pressure
30 Mar 2011 00:51
Imo, the official Kawasaki Motorcycle Shop Manual and/or Kawasaki Motorcycle Service Manual, often referred to as "FSM" are superior to any of the aftermarket accessory manuals.
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- jjack010
-
Topic Author
- Offline
- User
-

Registered
- Posts: 42
- Thanks: 3
Re: Interpreting cylinder pressure
30 Mar 2011 01:04
I suppose I'll be purchasing one.
1974 Kawasaki Z1
Central Texas
Central Texas
Please Log in or Create an account to join the conversation.
- KZ250LTD
-
- Offline
- User
-

Registered
- Posts: 1311
- Thanks: 16
Last edit: 13 Feb 2012 18:59 by KZ250LTD.
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: Interpreting cylinder pressure
30 Mar 2011 07:37
Check the valve clearances. The lower cylinders may have less lash that the higher cylinders.
Those numbers are not surprising based on looking at the bike. After all, it's purpose built.
As for why they're high, pistons, cams, deck.... Those are pretty normal numbers for a motor that was built to run down a drag strip.
What can you do to get better street manners out of it [around town type of riding]? Not much outside of carb tuning, ignition timing and possibly cam timing without going inside the motor.
To debate 14% vs 10% variation in PSI as the acceptable variance is a waste of time. The closer the compression is between cylinders, the better, period... end of discussion as far as I'm concerned.
So start with the start...valve lash check, follow up with ignition timing & good carb synch and pilot fuel adjustment. See what results you get.
If you can find a grind number on the cams, I can help you out a bit further with suggestions in that area.
Larry C
Those numbers are not surprising based on looking at the bike. After all, it's purpose built.
As for why they're high, pistons, cams, deck.... Those are pretty normal numbers for a motor that was built to run down a drag strip.
What can you do to get better street manners out of it [around town type of riding]? Not much outside of carb tuning, ignition timing and possibly cam timing without going inside the motor.
To debate 14% vs 10% variation in PSI as the acceptable variance is a waste of time. The closer the compression is between cylinders, the better, period... end of discussion as far as I'm concerned.
So start with the start...valve lash check, follow up with ignition timing & good carb synch and pilot fuel adjustment. See what results you get.
If you can find a grind number on the cams, I can help you out a bit further with suggestions in that area.
Larry C
Please Log in or Create an account to join the conversation.
- jjack010
-
Topic Author
- Offline
- User
-

Registered
- Posts: 42
- Thanks: 3
Re: Interpreting cylinder pressure
30 Mar 2011 10:24
Good info. I have my to do list made.
1974 Kawasaki Z1
Central Texas
Central Texas
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
