V&H Installation Review

  • calvin17d
  • calvin17d's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 187
  • Thanks: 2

V&H Installation Review

03 Apr 2011 03:39
#442300
Hello Sports Fans!

A few months back I mentioned in another thread that I was going to be installing my new Vance & Hines 4:1 exhaust. There were a few requests for a review of my experience with packaging, installation, & fit.

Packaging:
Packaging came from Z1E. Although the product was packaged in V&H packaging, it is difficult to say how much it had been improved after Z1E added my additional items to this same box. The baffle came in a smaller box also included in the large packaging. This smaller box was somewhat damaged but was no indication of what I found to be nearly flawless exterior of the exhaust. Packaging was quite adequate, and I was happy with the condition of the products initial appearance.

Observations:
After hearing word from the skeptics, I was quick to inspect my new product. As mentioned, the exterior was flawless.....no scratches, chips, flaking chrome, etc. The Baffle seemed quite clean and of high quality. My only complaint would be the presence of surface rust at the interior of the pipes. To provide myself with a piece of mind and to also reduce bluing of my header, I sprayed the interiors with a high temp paint. This quickly made me feel much better about the surface rust which also cleaned up quite easily.

Fit:
I was very eager to take the header out for a quick mock-up and to ensure that I had ordered the correct system. The tubing for the #3 cylinder did sit noticeably lower than the others. This did not impede my installation one bit. With the use of Redlines thick copper gaskets, and some grease I was able to seat the headers into the head with no problem. The tail piece does not clamp onto the header on this exhaust. The Tail piece merely slides inside of the header at about 4-5" in length. The extremely snug fit has me convinced that this exhaust will not leak nor will vibrations be an issue. I did have to perform some light sanding at the junction. With an application of a light film of assembly lube, the tail piece found its home.

This particular application lined up with rear foot peg mount on my bike. My kerker had mounted below the swing arm, so I was a bit caught off guard by this, but not disappointed. At first glance and after some wrestling I thought that the mount on the tail piece would be my first real issue requiring some fabrication, drilling, grinding, etc. I gave the tail piece a couple of smacks with a mallet and block of wood, and was then able to wrestle the mounting flange into position.

For the money, I am more than impressed with this exhaust. I think that the guys at Z1E are likely aware of the issues that V&H has been having and they probably have a lot to do with the fact that I got a usable unit. That being said, if you go with a V&H, go with a unit from Z1E, and order the big thick gaskets from Redline (Those suckers are awesome).
1976 Kz900 A4

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: V&H Installation Review

03 Apr 2011 07:03
#442303
calvin17d wrote: ...Tail piece merely slides inside of the header at about 4-5" in length...extremely snug fit...I did have to perform some light sanding at the junction....

An alternative to sanding, grinding or filing:

Muffler shop pipe expander tool takes about 5 seconds and often done for minimal charge or free with no visible change (no cracks in chrome) and resulting in perfectly snug but manageable fit.

The muffler guy smiles and says, I'd marry that! ;)

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • Jeff.Saunders
  • Jeff.Saunders's Avatar
  • Offline
  • Vendor
  • Vendor
    Vendors
  • Posts: 1238
  • Thanks: 149

Re: V&H Installation Review

03 Apr 2011 08:31
#442313
While the box was still V&H, we repack the V&H pipes to survive UPS... So all the peanuts are from us.

We inspect EVERY pipe we receive - and have to. 30% of the pipes we receive end up going back. V&H and Kerker both have major quality issues. We are currently waiting on both manufacturers to receive replacement header pipes.

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: V&H Installation Review

03 Apr 2011 10:35
#442335
great write up and very important to memebers here...i read many posts where folks want to know if the V&H pipes can be bought and used ...and i believe that the feedback is from a few years back...a current purchase write up is more fair to them...also it seems having a seller who is aware of the previous issues and can mediate pre-ship to your door makes a big differnce....

oh and the bike is soooooo clean and nice...really simple ,beautiful lines,a classic Z on any shore imo....

nice kitchen counter shot....wife must have been out for that one....i get new parts shipped and try and hide em by my stereo table till the weekend....and the by magic make it to my garage while i'm at work...must be the kz elves.....great product review.....great bike...
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: V&H Installation Review

03 Apr 2011 11:03
#442341
Excellent!... Nice write up. B)
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • calvin17d
  • calvin17d's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 187
  • Thanks: 2

Re: V&H Installation Review

03 Apr 2011 13:11
#442361
Thanks for the positive feedback guys. I have been working on rebuilding this bike since December. This exhaust was one of my favorite upgrades. I was really excited to have a chrome exhaust, and am very glad that I had very little fuss... I will post more pictures when I finish getting her back together.
1976 Kz900 A4

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum