lil smokey!!

  • bgmrc
  • bgmrc's Avatar Topic Author
  • User
  • User
    Public
  • Thanks: 0

lil smokey!!

03 Apr 2011 22:27 - 03 Apr 2011 22:43
#442452
so i finally got my project Cafe up and running..

Not complete yet..(CAFE SEAT)

but now i have it rideable and its been fun so far...but i have alot of smoke coming out of the left cylinder mostly...What do yall find is the most common thing wrong when u see this happen..

Rings?

any thoughts are welcome
and im fouling the plug pretty good also...lil bit rich still
i have adjusted the air screw in till it pops....then a half back out and it clears up

im also running the B7ES plugs..i have pods and 50 low and 135 main jets...is it reccomended to have the B6 or the B7 if u have more gas/air running thru ur bike

but im also having an issue with getting the throttle to go all the way back so its low enough to idle under 1500rpm...
i have the idle screw backed out till where is does not even touch and it still is at 1500...even when i untwist pretty hard on the throttle.. its a lil high still

Thanx for any help!


MARC
Last edit: 03 Apr 2011 22:43 by bgmrc.

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: lil smokey!!

04 Apr 2011 02:15 - 04 Apr 2011 02:16
#442503
maybe a broken oil ring?

high idle is sometimes from a vacuum leak.
1979 KZ-750 Twin
Last edit: 04 Apr 2011 02:16 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: lil smokey!!

04 Apr 2011 09:01
#442518
bgmrc wrote: ...smoke coming out of the left cylinder mostly...fouling the plug...rich still....

Other possibilities:
Pilot circuit too rich for whatever reason;
Worn valve stem seal;
Fuel level too high in float bowl.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • bgmrc
  • bgmrc's Avatar Topic Author
  • User
  • User
    Public
  • Thanks: 0

Re: lil smokey!!

04 Apr 2011 11:34
#442538
^^ great options..

thanx!

any thoughts on what plug is better for more gas/air like mine?
B7 or the B6 as far as heat range goes...
like what plug is better for a lil to rich setup?

Thanx

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: lil smokey!!

04 Apr 2011 14:34 - 04 Apr 2011 14:35
#442584
bgmrc wrote: ...any thoughts on what plug is better for more gas/air like mine?
B7 or the B6 as far as heat range goes...
like what plug is better for a lil to rich setup?....

Another possibility could be dirty or over-oiled pod filters.

Would recommend standard spark plug (whatever that happens to be) as provided in the FSM.
And adjust the carb settings accordingly.

Imo, using a hotter plug just masks an underlying issue that ought to be corrected.

With decent compression, valve clearances within specs, healthy fat blue spark, proper ignition timing and advancer function, and correct fuel mixture, the standard spark plug should be just fine.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 04 Apr 2011 14:35 by Patton.

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: lil smokey!!

04 Apr 2011 14:46 - 04 Apr 2011 14:48
#442592
The underlying issue here is a worn out engine.

Rings alone will not necessarily fix that kind of smoke, whats the compression numbers like?
Probly needs a tear down with new pistons/bore job... or could be just a broken oil ring... or you're running with no valve seals left. :laugh:

Then you can frig with the jetting. Run stock plugs.

Good luck.

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)
Last edit: 04 Apr 2011 14:48 by TeK9iNe.

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: lil smokey!!

04 Apr 2011 16:16
#442614
B6ES is the right plug for a 750 twin.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • bgmrc
  • bgmrc's Avatar Topic Author
  • User
  • User
    Public
  • Thanks: 0

Re: lil smokey!!

05 Apr 2011 18:31
#442816
thanx for the reponces!!

its deff and worn motor...
25,000 miles

needs a tear down..but was hopefull to make it till next winter...

So ill check the float level and hope that does a lil help to carry me till it cool off again..

we shall see..

thanx

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: lil smokey!!

05 Apr 2011 19:23 - 05 Apr 2011 19:27
#442828
bgmrc wrote: ...its deff and worn motor....25,000 miles
needs a tear down..but was hopefull to make it till next winter...
So ill check the float level and hope that does a lil help to carry me till it cool off again...

With good maintenance and without severe abuse, KZ motors should far exceed 25,000 miles before needing a tear down.

Would suggest a leak-down test to give a good idea of engine condition, and which would help identify suspect areas in each individual cylinder, such as rings, intake valve, exhaust valve, and head gasket.

For these reasons, a leak-down test may enable a better more detailed diagnosis than the standard compression test.

In any event, would assure the valve clearances are within specs, and then re-test compression and engine performance before proceeding with tear-down.

Often, a good complete tune-up, including valve clearance, correct ignition timing with proper advancer function, new plugs, visually observing fat blue spark, assuring ample clean fuel supply (tank interior, petcock, in-line fuel filter , and proper adjustment of carbs, along with changing oil and filer, and clutch push-rod adjustment, will make a significant improvement in engine performance.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 05 Apr 2011 19:27 by Patton.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum