Oil light on.
- gaslk
-
Topic Author
- Offline
- User
-

Registered
- Posts: 4
- Thanks: 0
Oil light on.
07 Apr 2011 19:38
Hi all,
I just finished repainting the tach and speedo on my new ( to me) 1980 kz 550. After reinstalling with all new bulbs the oil and headlamp lights are on and will not go out. Headlamp is working fine on both high and low. Oil was a tad low so i topped that off. I am assuming the oil pump is working because as soon as the bike is started there is no oil in the sightglass. Bike runs fine and no strange noise. I am thinking I might have shorted something when I put the tach back on. No lights were on prior to removal. First thought was the oil pres sender, but that wont explain the headlamp light. Any thoughts on where to look. I plan on taking tach off and see what happens when the wires are not crammed in the case. Thanks in advance.
I just finished repainting the tach and speedo on my new ( to me) 1980 kz 550. After reinstalling with all new bulbs the oil and headlamp lights are on and will not go out. Headlamp is working fine on both high and low. Oil was a tad low so i topped that off. I am assuming the oil pump is working because as soon as the bike is started there is no oil in the sightglass. Bike runs fine and no strange noise. I am thinking I might have shorted something when I put the tach back on. No lights were on prior to removal. First thought was the oil pres sender, but that wont explain the headlamp light. Any thoughts on where to look. I plan on taking tach off and see what happens when the wires are not crammed in the case. Thanks in advance.
Dutchess County, NY
1974 Z1 900
1979 KZ 650
1980 KZ 550
1980 KZ 1000 ltd
1974 Z1 900
1979 KZ 650
1980 KZ 550
1980 KZ 1000 ltd
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Oil light on.
07 Apr 2011 19:42
loose ground wire?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Oil light on.
07 Apr 2011 19:46
Is it possible that you put the bulbs that light the instrument for night time into the wrong sockets? This may be why you have both a head lamp and oil light on all of the time.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- gaslk
-
Topic Author
- Offline
- User
-

Registered
- Posts: 4
- Thanks: 0
Re: Oil light on.
07 Apr 2011 19:46
I'm guessing it has to be something like that.
Dutchess County, NY
1974 Z1 900
1979 KZ 650
1980 KZ 550
1980 KZ 1000 ltd
1974 Z1 900
1979 KZ 650
1980 KZ 550
1980 KZ 1000 ltd
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Oil light on.
07 Apr 2011 23:09
Just in case you need....
The Bulb will have +12Vdc (Battery voltage) applied to it from the ignition switch. When the oil switch is activated, it will pass ground to the bulb...
The Bulb will have +12Vdc (Battery voltage) applied to it from the ignition switch. When the oil switch is activated, it will pass ground to the bulb...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Oil light on.
07 Apr 2011 23:09
Just in case you need....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
