running on three cylinders
- gcarson64
-
Topic Author
- Offline
- User
-

Registered
- Posts: 63
- Thanks: 0
running on three cylinders
07 Apr 2011 22:21
hello i have a 1980 kz550 and have been working on getting it running. my problem is the #4 cylinder is not running. when it was running on 3 cylinders i sprayed a little ether in the pod for #4 and it started running for a few seconds on all four cylinders. i would assume that means it is not getting gas (or enough) to the cylinder am i right? and also what is a good jet kit to get for pods i would prefer stage 3 but where would i be able to get something like that. please let me know thanks.
1980 kz550 38,500 miles basket case ( soon to be a BOBBER )
1983 kz550 9,600 miles
1988 jeep grand wagoneer 144,500 miles 4 mpg
1983 kz550 9,600 miles
1988 jeep grand wagoneer 144,500 miles 4 mpg
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: running on three cylinders
07 Apr 2011 22:38
Could be a float not working properly, check fuel height in bowl.
Mixture screw setting way off, check.
Bad air leak, check carb mounts/boots.
If it fired off with ether and #1 cyl is fine, I would suspect good spark, but it cant hurt to check as well.
Could just be a clogged pilot jet... pull and look through/blow out with cleaner.
www.z1enterprises.com is reliable and inexpensive for parts.
Good luck.
Mixture screw setting way off, check.
Bad air leak, check carb mounts/boots.
If it fired off with ether and #1 cyl is fine, I would suspect good spark, but it cant hurt to check as well.
Could just be a clogged pilot jet... pull and look through/blow out with cleaner.
www.z1enterprises.com is reliable and inexpensive for parts.
Good luck.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- jjack010
-
- Offline
- User
-

Registered
- Posts: 42
- Thanks: 3
Re: running on three cylinders
07 Apr 2011 22:47
Yeah, i agree with Tek9. Sounds like it isn't getting fuel. I would pull the carbs off and go through them using one of the excellent tutorials on this forum. Take the intake boots off and inspect them as well. If checking while on the bike, use wd40. +1 for getting parts from Z1.
1974 Kawasaki Z1
Central Texas
Central Texas
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: running on three cylinders
10 Apr 2011 12:06jjack010 wrote: Yeah, i agree with Tek9. Sounds like it isn't getting fuel. I would pull the carbs off and go through them using one of the excellent tutorials on this forum. Take the intake boots off and inspect them as well. If checking while on the bike, use wd40. +1 for getting parts from Z1.
Good one...
When performing the spray wd40 test, make sure to get it on/around the small linkages that pass thru the carbs and such, any places that air could possibly leak thru.
Check for a change in rpm, but also watch for a change in exhuast color.
Regards,
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- zmaniscalco
-
- Offline
- User
-

Registered
- Posts: 119
- Thanks: 0
Re: running on three cylinders
11 Apr 2011 00:48
Lol, I ran off three cylinders in the 70’s it was a H2
78 kZ1000
79 KZ1000 Ltd turbo
79 KZ1000 Ltd turbo
Please Log in or Create an account to join the conversation.
- Treewizard
-
- Offline
- User
-

Registered
- Posts: 84
- Thanks: 1
Re: running on three cylinders
11 Apr 2011 23:30
a good sync wouldnt hurt 
i had a #4 not firing after a rebuild and that was to blame
i had a #4 not firing after a rebuild and that was to blame
1983 KZ 750 shaft
2002 ZRX 1200R
Raleigh NC
2002 ZRX 1200R
Raleigh NC
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
