kz1000 with turbo
- zmaniscalco
-
Topic Author
- Offline
- User
-

Registered
- Posts: 119
- Thanks: 0
kz1000 with turbo
08 Apr 2011 10:49
I bought this kz the way it is, a 1075 kit, and a American turbo pak with a 10lb boost. The guy before me had the valve cover gasket loose and it leaked, I asked him why and he said thats a lot of boost and it has to go somewhere.
Well I sealed it and now have a problem with blowing out my breather filter and also looks like blowby comming through the turbo, but running much better......
Any ideas please, I put the filter on right at the case and thinking of putting it on a long line thinking the oil will not get that high, and maybe a catch can for the blowby.
Has anyone done this?
Well I sealed it and now have a problem with blowing out my breather filter and also looks like blowby comming through the turbo, but running much better......
Any ideas please, I put the filter on right at the case and thinking of putting it on a long line thinking the oil will not get that high, and maybe a catch can for the blowby.
Has anyone done this?
78 kZ1000
79 KZ1000 Ltd turbo
79 KZ1000 Ltd turbo
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: kz1000 with turbo
08 Apr 2011 12:30 - 08 Apr 2011 12:31
Let me be the first to say YIKES. :laugh:
You can make a collector type system for the breather, same as stock setup, but higher up with a line to a can w/ nice large filtered hole.
Blowby coming through turbo where? Waste gate? You're seeing this cause your running it partially dissasembled?
Need more specifics...
You can make a collector type system for the breather, same as stock setup, but higher up with a line to a can w/ nice large filtered hole.
Blowby coming through turbo where? Waste gate? You're seeing this cause your running it partially dissasembled?
Need more specifics...
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Last edit: 08 Apr 2011 12:31 by TeK9iNe.
Please Log in or Create an account to join the conversation.
- zmaniscalco
-
Topic Author
- Offline
- User
-

Registered
- Posts: 119
- Thanks: 0
Re: kz1000 with turbo
08 Apr 2011 13:16
I think I am getting blowby because my filter filled up with oil and now has too much pressure and is blowing back into the turbo. I ran fine before I sealed up the valve cover gasket, and now I think I have to much pressure and have to put a lage tube going up and to a catch can........
78 kZ1000
79 KZ1000 Ltd turbo
79 KZ1000 Ltd turbo
Please Log in or Create an account to join the conversation.
- T_Dub
-
- Offline
- User
-

Registered
- Posts: 1441
- Thanks: 26
Re: kz1000 with turbo
08 Apr 2011 13:17
Yeah any turbo system needs a good oil catch can plumbed off the breather.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: kz1000 with turbo
08 Apr 2011 13:33
run a leak down test on motor to make sure its not just blowing past the rings
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- zmaniscalco
-
Topic Author
- Offline
- User
-

Registered
- Posts: 119
- Thanks: 0
Re: kz1000 with turbo
08 Apr 2011 14:32
thanks T_Dud, thanks is what everything I am reading says
Wireman- I was thinking I would keep I eye on the catch can, because I had none at all till I sealed the valve cover gasket, so if I get a lot of oil there that is next, thanks
so I am going to run a strate 1/2" tube up high or maybe to the back of the fender and have a vented catch can and no filter, I think that will vent it ok.....how does that sound?
Wireman- I was thinking I would keep I eye on the catch can, because I had none at all till I sealed the valve cover gasket, so if I get a lot of oil there that is next, thanks
so I am going to run a strate 1/2" tube up high or maybe to the back of the fender and have a vented catch can and no filter, I think that will vent it ok.....how does that sound?
78 kZ1000
79 KZ1000 Ltd turbo
79 KZ1000 Ltd turbo
Please Log in or Create an account to join the conversation.
- zmaniscalco
-
Topic Author
- Offline
- User
-

Registered
- Posts: 119
- Thanks: 0
Re: kz1000 with turbo
08 Apr 2011 14:35
oh and thank you for starting this off TeK9iNe, sound like you have the same idea
78 kZ1000
79 KZ1000 Ltd turbo
79 KZ1000 Ltd turbo
Please Log in or Create an account to join the conversation.
- Jeff.Saunders
-
- Offline
- Vendor
-

Vendors
- Posts: 1238
- Thanks: 149
Re: kz1000 with turbo
08 Apr 2011 15:32
I have two additional breathers on the valve cover of my turbo'd Z1. These are just tapped and epoxied to the cover to release the positive crank case pressure. I have them vented back under the swing arm to the rear axle.
When I bought the bike it had this valve cover on - I hated the look, but soon learned the extra vents served a purpose as oil started puking out of every seam on the bike...
When I bought the bike it had this valve cover on - I hated the look, but soon learned the extra vents served a purpose as oil started puking out of every seam on the bike...
Please Log in or Create an account to join the conversation.
- zmaniscalco
-
Topic Author
- Offline
- User
-

Registered
- Posts: 119
- Thanks: 0
Re: kz1000 with turbo
08 Apr 2011 15:39
Jeff, thanks,
I was thinking about that but Mr. Turbo in Houston said that is not the proper way to do it????
Do you have a pic so I can see where and size please.
Are you also running a big breather hose also with or with out catch can?
I was thinking about that but Mr. Turbo in Houston said that is not the proper way to do it????
Do you have a pic so I can see where and size please.
Are you also running a big breather hose also with or with out catch can?
78 kZ1000
79 KZ1000 Ltd turbo
79 KZ1000 Ltd turbo
Please Log in or Create an account to join the conversation.
- Injected
-
- Offline
- User
-

Registered
- Posts: 1842
- Thanks: 1285
Re: kz1000 with turbo
08 Apr 2011 22:20
Run two... one from the stock breather cover with a hose barb - 3/8" ID hose should be plenty... and another from the cam cover - same size as from the breather cover.
If you still have issues add another in the cam cover... there's no harm in venting these motors as much as possible - another one in the upper crank case would be good buts its difficult to install without splitting the cases. The cam cover ones are easy to install... route the lines to an opened catch can that can be drained and is secured to the frame or motor.
A stock motor will puke oil into the air box at high RPM... a worked on motor even more... drag race motors have 3-4 (or more) vent areas.
I don't think you should need pictures for this as it is pretty easy to understand.
If you still have issues add another in the cam cover... there's no harm in venting these motors as much as possible - another one in the upper crank case would be good buts its difficult to install without splitting the cases. The cam cover ones are easy to install... route the lines to an opened catch can that can be drained and is secured to the frame or motor.
A stock motor will puke oil into the air box at high RPM... a worked on motor even more... drag race motors have 3-4 (or more) vent areas.
I don't think you should need pictures for this as it is pretty easy to understand.
1978 KZ650B2 w 1197cc Z1 engine
1977 KZ650B1 w 750cc Spectre engine
1979 KZ650C3 w 831cc Hot Rod engine
1978 KZ650C2 w 762cc DFI project
1977 KZ650C1 stock restoration project
1978 KZ650B2 modified project
1977 KZ650B1 w 750cc Spectre engine
1979 KZ650C3 w 831cc Hot Rod engine
1978 KZ650C2 w 762cc DFI project
1977 KZ650C1 stock restoration project
1978 KZ650B2 modified project
Please Log in or Create an account to join the conversation.
- zmaniscalco
-
Topic Author
- Offline
- User
-

Registered
- Posts: 119
- Thanks: 0
Re: kz1000 with turbo
09 Apr 2011 01:30
ok here is the start
and even room for my bottles of octane booster
if this does not work I am going to vent the valve cover.
Thanks Injected, I want to see where he had the insatlled instide above the plugs or on the outside sticking out.
and even room for my bottles of octane booster
if this does not work I am going to vent the valve cover.
Thanks Injected, I want to see where he had the insatlled instide above the plugs or on the outside sticking out.
78 kZ1000
79 KZ1000 Ltd turbo
79 KZ1000 Ltd turbo
Please Log in or Create an account to join the conversation.
- zmaniscalco
-
Topic Author
- Offline
- User
-

Registered
- Posts: 119
- Thanks: 0
Re: kz1000 with turbo
09 Apr 2011 01:32
[attachment:1]C:\fakepath\-3009.jpg[/attachment]
pic
pic
78 kZ1000
79 KZ1000 Ltd turbo
79 KZ1000 Ltd turbo
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
