What was that sound?

  • retterath
  • retterath's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 99
  • Thanks: 9

What was that sound?

08 Apr 2011 17:54
#443455
1980 KZ750. Stock. 3x,000 miles.

I installed a new valve cover gasket and cam plugs. Nothing eventfull.
Pulled the cam chain tensioner because I thought it was the recalled ball lock style. It wasn't. So I put on another cross wedge one that I had cleaned and greased.
I try starting it up, and it spins over just fine. Every once in a while,there's a loud metallic spring sound, like something snapping loose. Any ideas?

Please Log in or Create an account to join the conversation.

  • kzcafe750_24
  • kzcafe750_24's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 50
  • Thanks: 0

Re: What was that sound?

13 Apr 2011 02:05
#444371
Is the sound coming while your spinning it over with the starter, or after it has started running?
1981 Kz 750-4 LTD - Wiseco 810 Big Bore,Ported cylinder head, GPZ 750 Cams,Dyna Ignition(DynaS,Green Coils,DRL400 2stage Revlimiter), RC 4 into 1 fitted with Yoshi muffler, ZR550 Swing arm, ZR550 Rear Rim, ZX750turbo front end SuperFlo Dyno Tuned- 68WHP&43WTq(ftlbs)
1986 Honda Rebel 250 (Stock)
1985 Honda Magna 500 (Stock)
1994 Honda XR200R (Built)

Please Log in or Create an account to join the conversation.

  • dkmk
  • dkmk's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 282
  • Thanks: 18

Re: What was that sound?

13 Apr 2011 10:20
#444403
A few years back I forgot to position the timing plate at the curve past the 2/3 firing mark when taking up the cam chain tension after a valve adjustment. Made an awful racket on start-up. Not sure about the procedure for your bike... B)
Northern Ontario
Zapp: "Kif, I'm feeling the Captain's Itch."
Kif: "I'll get the powder, sir."

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: What was that sound?

13 Apr 2011 11:53
#444410
These are from the Kawasaki parts, pictured the cam chain and guides/ tensioner in the lower engine. Also the very important guide in the valve cover.
Is the length of the plunger the same between the newer wedge style and the OEM tensioner?
Did you have the tensioner removed when tightening down the valve cover? As guide damage may/ will result if the wedge is in holding tension on the chain.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • retterath
  • retterath's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 99
  • Thanks: 9

Re: What was that sound?

14 Apr 2011 15:27 - 14 Apr 2011 15:30
#444594
Put a new battery in and it's fine.:huh:
The new tensioner is the same style as the one removed. I thought it was a ball style, turns out both are cross wedge style. Tensioner was removed when valve cover went back on.
At any rate, I swapped out the battery, bike fired right up without any more noise.

**shrug**

The noise seemed to happen when I stopped cranking. I'm thinking low voltage combined with a 30 year old starter clutch. . .
Last edit: 14 Apr 2011 15:30 by retterath.

Please Log in or Create an account to join the conversation.

  • apbling
  • apbling's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 999
  • Thanks: 12

Re: What was that sound?

14 Apr 2011 17:19
#444611
mine used to make noises too when I had to crank on it alot to start them and the battery was on it's last leg.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum