82 j top end rebuild

  • bigkzfan
  • bigkzfan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • if grandpa had tits he"d be grandma, if
  • Posts: 156
  • Thanks: 1

82 j top end rebuild

09 Apr 2011 22:14
#443711
well i wanna thank everyone on kz rider for all the help with my rebuild...got the cams in, top end back together and 180psi of compression in all 4cylinders now!!!!! hope to light this candle in the next few days!!! had 3 angle valve job, viton valve seals, A.P.E valve guides new piston rings, new fork seals rebuilt rear caliper.. stage 3 kit in the carbs new needle seat rebuilt petcock man hard to count everything thats been done..
hello, i own a 1982 kz1000 j model with a 4into1 header and factory air box...

Please Log in or Create an account to join the conversation.

  • bigkzfan
  • bigkzfan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • if grandpa had tits he"d be grandma, if
  • Posts: 156
  • Thanks: 1

Re: 82 j top end rebuild

10 Apr 2011 01:18
#443737
when i got it set on tdc i put the foward cover bolt in and lightly put a pair of vise grips on the 17 mm nut on timing advancer and placed them to where the pistons would not move off of tdc..then i installed the cams counted to the correct number of pins to the rear made sure it was all lined up then installed the cam caps torqued them 6ft lbs and proper torque sequence then put the valve cover on, next installed A.P.E manual cam chain adjuster , rolled the engine over one time to check for binding then checked compression and it was 180 across all 4 cylinders.... i did not roll engine over without the valve cover and cam chain adjuster installed!!!! this is where my trouble was happening!!!
hello, i own a 1982 kz1000 j model with a 4into1 header and factory air box...

Please Log in or Create an account to join the conversation.

  • grumpy56
  • grumpy56's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 310
  • Thanks: 6

Re: 82 j top end rebuild

10 Apr 2011 01:35
#443739
82 J owner here too. Congrats on getting that classic back on the burner!
Lewis
1982 KZ1000-J2
2006 HD FXD35
1970 Suzuki T350
1972 Suzuki GT380 (In-Process)
In The Past...71 TM400, 72 H-D SS350, 72 GT380, 75 Z1B, 77 XLH, 79 CB750K

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: 82 j top end rebuild

10 Apr 2011 03:09
#443742
bigkzfan wrote: when i got it set on tdc i put the foward cover bolt in and lightly put a pair of vise grips on the 17 mm nut on timing advancer and placed them to where the pistons would not move off of tdc..then i installed the cams counted to the correct number of pins to the rear made sure it was all lined up then installed the cam caps torqued them 6ft lbs and proper torque sequence then put the valve cover on, next installed A.P.E manual cam chain adjuster , rolled the engine over one time to check for binding then checked compression and it was 180 across all 4 cylinders.... i did not roll engine over without the valve cover and cam chain adjuster installed!!!! this is where my trouble was happening!!!
what trouble?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • bigkzfan
  • bigkzfan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • if grandpa had tits he"d be grandma, if
  • Posts: 156
  • Thanks: 1

Re: 82 j top end rebuild

10 Apr 2011 08:51
#443750
thank you!!!! it is a good feeling
hello, i own a 1982 kz1000 j model with a 4into1 header and factory air box...

Please Log in or Create an account to join the conversation.

  • bigkzfan
  • bigkzfan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • if grandpa had tits he"d be grandma, if
  • Posts: 156
  • Thanks: 1

Re: 82 j top end rebuild

10 Apr 2011 08:52
#443751
keeping marks lined up
hello, i own a 1982 kz1000 j model with a 4into1 header and factory air box...

Please Log in or Create an account to join the conversation.

  • bigkzfan
  • bigkzfan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • if grandpa had tits he"d be grandma, if
  • Posts: 156
  • Thanks: 1

Re: 82 j top end rebuild

10 Apr 2011 19:54
#443913
together again!!!!!!!!!!!!!!
hello, i own a 1982 kz1000 j model with a 4into1 header and factory air box...

Please Log in or Create an account to join the conversation.

  • bigkzfan
  • bigkzfan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • if grandpa had tits he"d be grandma, if
  • Posts: 156
  • Thanks: 1

Re: 82 j top end rebuild

10 Apr 2011 20:23
#443917
could i start the engine with exhaust off of it for a very short period of time?? just a test fire
hello, i own a 1982 kz1000 j model with a 4into1 header and factory air box...

Please Log in or Create an account to join the conversation.

  • gengomerpyle
  • gengomerpyle's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 616
  • Thanks: 17

Re: 82 j top end rebuild

10 Apr 2011 21:11
#443928
bigkzfan wrote: could i start the engine with exhaust off of it for a very short period of time?? just a test fire
i wouldnt do it. im sure flames will come out and it may burn a valve
1982 GPZ750R1 ELR
1978 Honda CB750F SuperSport
1971 Honda CB750K
1970 Honda CL100 Scrambler

Please Log in or Create an account to join the conversation.

  • bigkzfan
  • bigkzfan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • if grandpa had tits he"d be grandma, if
  • Posts: 156
  • Thanks: 1

Re: 82 j top end rebuild

10 Apr 2011 21:14
#443931
point taken!! thank you for the advice
hello, i own a 1982 kz1000 j model with a 4into1 header and factory air box...

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum