starting engine after rebuild.. advice

  • bigkzfan
  • bigkzfan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • if grandpa had tits he"d be grandma, if
  • Posts: 156
  • Thanks: 1

starting engine after rebuild.. advice

10 Apr 2011 20:31
#443922
should be test firing engine tomorrow...any advice before i do?? can i test fire it with no exhaust for a short period to leak check engine make sure it starts?? thanks for everybodys help again thru this learning project
hello, i own a 1982 kz1000 j model with a 4into1 header and factory air box...

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: starting engine after rebuild.. advice

10 Apr 2011 21:21
#443935
You should not run it without exhaust headers. Some of the things I did after my last rebuild:

1) I made sure and put plenty of oil in the top end (cam buckets) to protect the cam lobes.

2) I took the spark plugs out and leg kicked the engine a while to pump oil into the bearings.

3) I ran it about 20 minutes then shut it down and retorqued the head and readjusted the cam chain tension.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: starting engine after rebuild.. advice

10 Apr 2011 23:15
#443960
Do not run the engine without the exhuast headers, less you dont care about it.

If new cams, make sure to run above 2000 rpm for first 15 minutes.

If it is bored w/new pistons, then break it in normally with a heat up, then cool down +retorque phase, then ride, then retorque.

If just new rings, get on it and go ride the snot out of her for a good 20 minutes, then come back and check torques.

Do it.

:laugh:
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: starting engine after rebuild.. advice

11 Apr 2011 00:27
#443972
Re-torque on head should be done on a cold engine, after the engine has reached normal operating temperature and then cooled down completely, such as parked overnight.

It doesn't hurt anything to check torque on a warm engine, but should not be the final re-torque effort.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum