Valve tick
- sparkn
-
Topic Author
- Offline
- User
-

Registered
- Posts: 93
- Thanks: 0
Valve tick
11 Apr 2011 01:29
Wouldn't you know it the last ride before I start tearing my '79 KZ650SR down for a restoration and a sudden ticking noise develops. This is no wear and tear tick. It came on suddenly as a result of a sudden low speed maneuver that caused the header pipe from the number 4 cylinder to smack a concrete parking block hard enough to slightly dent the pipe at the bung on the underside.
There is no perceivable loss of power. The tick is louder during acceleration, quietest when cruising, and obvious at idle. What I'd like to know are some thoughts on what to look for so I can evaluate (i.e. justify) the money I want to put into this bike. The motor has 8400 original miles on it and probably has never had a valve clearance check. If it's clearance causing the tick, I'd like to narrow what physically happened so I don't leave damaged part on the bike. Any thoughts would be great. Pics if necessary, but really all you can see is a slight dent in the exhaust bung under the bike.
There is no perceivable loss of power. The tick is louder during acceleration, quietest when cruising, and obvious at idle. What I'd like to know are some thoughts on what to look for so I can evaluate (i.e. justify) the money I want to put into this bike. The motor has 8400 original miles on it and probably has never had a valve clearance check. If it's clearance causing the tick, I'd like to narrow what physically happened so I don't leave damaged part on the bike. Any thoughts would be great. Pics if necessary, but really all you can see is a slight dent in the exhaust bung under the bike.
1979 KZ650 SR
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Valve tick
11 Apr 2011 01:46
probably an exhuast leak
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
The following user(s) said Thank You: sparkn
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Valve tick
11 Apr 2011 02:19
exhaust leak or loose valve, probably exhaust if it has a "crack crack" tone. Metallic tick is usually a valve.
1979 KZ-750 Twin
The following user(s) said Thank You: sparkn
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: Valve tick
11 Apr 2011 02:27
You smacked the exhaust and now it leaks.
Sounds reasonable to me.
Sounds reasonable to me.
KD9JUR
The following user(s) said Thank You: sparkn
Please Log in or Create an account to join the conversation.
- Bluemeanie
-
- Offline
- User
-

Registered
- Posts: 2516
- Thanks: 15
Re: Valve tick
11 Apr 2011 10:01
Listen real close to where #4 pipe bolts to head. Pipe most likley got "tweaked" and is slightly cocked at head resulting in a leak there.
1980 KZ650F1, Bought new out the door for $2,162.98!
The following user(s) said Thank You: sparkn
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Valve tick
11 Apr 2011 10:33
Check for any loose nuts on the exhaust clamps.
Please, not too tight. "Snug" is just fine.
Good Fortune!
Please, not too tight. "Snug" is just fine.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- sparkn
-
Topic Author
- Offline
- User
-

Registered
- Posts: 93
- Thanks: 0
Re: Valve tick
11 Apr 2011 10:38
That all sounds very encouraging and makes sense, especially since the noise can't be tracked with a stethoscope (pointy object stuck in my ear in such a way my doctor would cringe) and it seems to be noisiest where the header meets the head.
Thank you.
Thank you.
1979 KZ650 SR
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Valve tick
11 Apr 2011 10:53
Installation of new copper crush gaskets may resolve the leaking.
1973 Z1
KZ900 LTD
KZ900 LTD
The following user(s) said Thank You: sparkn
Please Log in or Create an account to join the conversation.
- sparkn
-
Topic Author
- Offline
- User
-

Registered
- Posts: 93
- Thanks: 0
Re: Valve tick
11 Apr 2011 12:03
Thanks. Looking for a set. I'm guessing Z1, Bike Bandit, or a vendor of the sort would have them.
1979 KZ650 SR
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
