Pinging at high rpm

  • idahojoe
  • idahojoe's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 7
  • Thanks: 0

Pinging at high rpm

11 Apr 2011 14:48
#444081
I have a kz1100 ltd with a problem i cant seem to pin down. When accelerating at higher speeds 60 or higher somtimes i get what sounds like a detonation. I thought it might be running lean as i live in denver and it had 117.5 jets. Changed until running to rich with 122 and no change. Checked my advance its working and timing is on. It does it mostly when hot but i have ridden it in 10 degree weather here so i know the engine shouldn't be overheating. I have plenty of power except when it happens.
Would a blown head gasket do this? I am buying a new gasket set becouse my base gasket is seeping some. I have checked my plugs and cant pin down witch cyl or cylinders are doing this it sounds like 3 or 4 but you know how sound travels. Any and all ideas you guys can give me would be great. I cant find a reason this bike should be doing this. Thanks.

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Pinging at high rpm

11 Apr 2011 15:47
#444091
How old are the ignition coils,sparkplug wires & caps? Any of these may be producing the noise you're hearing as "Ping".
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • idahojoe
  • idahojoe's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 7
  • Thanks: 0

Re: Pinging at high rpm

11 Apr 2011 16:08
#444094
Everything is new but the coils they are original. The bike set most of its life only had 20000 on it when I got it last year now it has about 38. I have tested them but haven't found a problem.

Please Log in or Create an account to join the conversation.

  • Kraz1
  • Kraz1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 394
  • Thanks: 30

Re: Pinging at high rpm

11 Apr 2011 16:50
#444101
You may want to look down onto the Tops of the Pistons and see how much Carbon-Build Up you have. This increases Compression, and not in a good way.

Please Log in or Create an account to join the conversation.

  • idahojoe
  • idahojoe's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 7
  • Thanks: 0

Re: Pinging at high rpm

11 Apr 2011 17:20
#444105
I have and everything is clean. When I got the bike the top end was completely rebuilt new pistons, rings valves ect. I stuck my bore scope in and everything looks good. The one thing is that I didn't retorque the head like I should have and when I did it wasent all that tight. Could a blown head gasket do this? It doesnt make since to me that it don't do it when cold just after it warms up good.

Please Log in or Create an account to join the conversation.

  • idahojoe
  • idahojoe's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 7
  • Thanks: 0

Re: Pinging at high rpm

11 Apr 2011 17:42
#444109
One thing I forgot to mention is the more load I put on the worse it gets. For instance accelerating up a steep hill or accelerating into a strong head wind. Its always on accelerating thats what made me think I was too lean but the plugs didnt look like it. I went and tried bigger jets now I know I'm rich and no change.

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: Pinging at high rpm

11 Apr 2011 17:45
#444110
have u tried premium gas to see if it goes away? if its a gasket leak, maybe u are hearing the compresion leak from 3 to 4 ? how about a compresion or even better, a leak down test.
Could it be an exhast leak? did u say u could feel a power loss when its hot ?
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Pinging at high rpm

11 Apr 2011 17:46
#444111
Using the Gas/Alcohol mix where you live? Tried adding Sea Foam and/or other octane boosters?
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Pinging at high rpm

11 Apr 2011 18:25
#444124
Ditto on loading it up with octane booster and see if it changes.

Maybe back the timing off five degrees as an experiment and see if it gets better or worse.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • idahojoe
  • idahojoe's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 7
  • Thanks: 0

Re: Pinging at high rpm

11 Apr 2011 20:06
#444143
I have done a compression test and it looked good but did it when cold might be different when hot. I only run 95 octane but when I have used 88 it does seem worse and that is exactly how it acts like I have to low octane or timing is off. I can try playing with the timing some.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Pinging at high rpm

11 Apr 2011 20:12
#444144
As per service manual, have you cleaned and lubricated the advancer for the Ignition? Maybe it is sticking, not returning properly?Also I'm in the springs and run 122.5 mains, 40 pilots in the BS34's. Should be B8ES plugs, other heat range would be incorrect.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • idahojoe
  • idahojoe's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 7
  • Thanks: 0

Re: Pinging at high rpm

11 Apr 2011 21:46
#444160
Yes first thing I did was the advance. Im running the plugs and the main jet is the 122.5 but I didnt change to the bigger 40 pilot jets could this be part of the problem

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum