clanging exhaust
- sigmund
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
clanging exhaust
12 Apr 2011 12:21
Hi. I am new here, and this looks like a great place to keep my 1980 kz1000 ltd running. It has 18,000 miles on it, and I have owned it since last September.
My issue with it is that when the exhaust is warmed up to operating temperature, there is a clanging sound coming from the left side muffler. No clanging when it is cold. The only thing I can think of is a loose baffle. Any other suggestions? Any suggestions for a fix apart from replacing the muffler? I have looked on ebay and there are very few mufflers listed. I guess I could go for the 4 into 1 system, but I really like the look of the stock pipes and muffler.
Thanks for any suggestions and help on this one.
My issue with it is that when the exhaust is warmed up to operating temperature, there is a clanging sound coming from the left side muffler. No clanging when it is cold. The only thing I can think of is a loose baffle. Any other suggestions? Any suggestions for a fix apart from replacing the muffler? I have looked on ebay and there are very few mufflers listed. I guess I could go for the 4 into 1 system, but I really like the look of the stock pipes and muffler.
Thanks for any suggestions and help on this one.
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: clanging exhaust
12 Apr 2011 13:12
Take a rubber hammer and carefully tap in the area where the sound comes from when the system is cold. If this confirms your idea of a loose baffle, you might be able to drill out the rivets holding the end cap,remove it and be able to access the baffle.
Some bikes are integrated with the baffle, others not.
I think using a drill and 1/8" drill bit will remove the head of the rivet allowing a punch and hammer to drive the rivet inside the muffler.
You'll need to buy a pop rivet tool and the correct length rivet to re-install the baffle and end cap.
Some bikes are integrated with the baffle, others not.
I think using a drill and 1/8" drill bit will remove the head of the rivet allowing a punch and hammer to drive the rivet inside the muffler.
You'll need to buy a pop rivet tool and the correct length rivet to re-install the baffle and end cap.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
The following user(s) said Thank You: sigmund
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Last edit: 12 Feb 2013 12:51 by martin_csr.
Please Log in or Create an account to join the conversation.
- sigmund
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: clanging exhaust
12 Apr 2011 15:19
Actually, my mechanic put a rubber damper on the center stand back in October. It was missing. Think where the center stand was banging on the muffler might have loosened a baffle?
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: clanging exhaust
12 Apr 2011 16:13
Anything is possible on these older bikes as welds break, and corrosion gets into tight areas. Another idea I had is you may have to remove the muffler with the loose baffle and then get a long wooden dowel and hammer to pop the end cap and baffle loose. You'll probably need help in holding the muffler from trying to escape when hit.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- sigmund
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Please Log in or Create an account to join the conversation.
- P21
-
- Offline
- User
-

Registered
- Posts: 471
- Thanks: 34
Re: clanging exhaust
12 Apr 2011 21:15
maybe the bushing is bad where muffler hangs from frame since he did not have a bumper for center stand.
just a shot
just a shot
Kawasaki KZ 1000 Police (2002) P21
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: clanging exhaust
12 Apr 2011 21:18
i think the baffle is welded on the end of muffler on the stock jardine/sardine exhuast
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- sigmund
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
