need 1075 engine rebuild 101
- glory roader
-
Topic Author
- Offline
- User
-

Registered
- Posts: 18
- Thanks: 0
need 1075 engine rebuild 101
16 Apr 2011 17:48
What cam specs, port, ect...is best for 1075cc upgrade. I need a good foundation and the best carbs. Currently I have 29 smoothbores. But I heard with a 1075cc and the right cams and rs34 carbs I could do some good damage.
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Please Log in or Create an account to join the conversation.
- glory roader
-
Topic Author
- Offline
- User
-

Registered
- Posts: 18
- Thanks: 0
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: need 1075 engine rebuild 101
16 Apr 2011 18:21
I understand--I have 3 sitting in my shop.But realistically there are all kinds of 600cc crotch rockets out there that will out perform our babies.U just need to come up with a combo that meets ur daily riding needs and let it go at that.1075 plus a set of nice street cams (Webb et al),plus the round slides should do a good job.If u want a little more,let Larry Cavanaugh(Cavanaugh Racing)street port ur heads and do a good valve job and u should be tight.I asume u have already done a good aftermarket ignition swap like Dyna S or Dyna 2000?bj
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: need 1075 engine rebuild 101
16 Apr 2011 18:52what bj said!hocbj23 wrote: I understand--I have 3 sitting in my shop.But realistically there are all kinds of 600cc crotch rockets out there that will out perform our babies.U just need to come up with a combo that meets ur daily riding needs and let it go at that.1075 plus a set of nice street cams (Webb et al),plus the round slides should do a good job.If u want a little more,let Larry Cavanaugh(Cavanaugh Racing)street port ur heads and do a good valve job and u should be tight.I asume u have already done a good aftermarket ignition swap like Dyna S or Dyna 2000?bj
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- testarossa
-
- Offline
- User
-

Registered
- Attack life, it's only trying to kill you.
- Posts: 3673
- Thanks: 83
Re: need 1075 engine rebuild 101
16 Apr 2011 19:03
Larry did say that in order to see the benefits of the RS34's you need port work.
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
Please Log in or Create an account to join the conversation.
- TexasKZ
-
- Offline
- Platinum Member
-

Registered
- Posts: 8420
- Thanks: 2804
Re: need 1075 engine rebuild 101
16 Apr 2011 20:42
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: need 1075 engine rebuild 101
17 Apr 2011 00:45i cant check it out,always ends up costing me money! :woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: need 1075 engine rebuild 101
18 Apr 2011 17:58
start with the 1075 and the 29's .see how u like it. the cam carb choice will depend on where u want the power. if u keep everything on the small side ,29's,under.400 lift cams, small intake runners. u will have nice low end power but will suffer up top. if u feel the need for more up top then u need to spend some more money. get Larry to port the head, and at that time Larry can help u pick a carb , and bigger carbs, if u feel u need even more top end. but be warned , as u go searching for more top end the bottom will get softer.
Good luck
M
Good luck
M
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Stu Pidasole
-
- Offline
- User
-

Registered
- if you aint mod'n, you aint rock'n!
- Posts: 628
- Thanks: 1
Re: need 1075 engine rebuild 101
18 Apr 2011 18:30
go see larry. i too will be running the rs 34 flats.
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: need 1075 engine rebuild 101
18 Apr 2011 19:17mark1122 wrote: start with the 1075 and the 29's .see how u like it. the cam carb choice will depend on where u want the power. if u keep everything on the small side ,29's,under.400 lift cams, small intake runners. u will have nice low end power but will suffer up top. if u feel the need for more up top then u need to spend some more money. get Larry to port the head, and at that time Larry can help u pick a carb , and bigger carbs, if u feel u need even more top end. but be warned , as u go searching for more top end the bottom will get softer.
Good luck
M
Well stated!
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: need 1075 engine rebuild 101
18 Apr 2011 22:47
I have a 1075 engine and ran it with 29's,Andrews 3X cams (418 lift), and stock head. Great combo.It could have been better but it is good enough.
I have a head that i spent hours on to smooth out the rough spots but won't install it until the engine needs tearing down.
I've had that engine for 12 years and suspect it will be a few more years before the engine needs anything.
Roy
I have a head that i spent hours on to smooth out the rough spots but won't install it until the engine needs tearing down.
I've had that engine for 12 years and suspect it will be a few more years before the engine needs anything.
Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
