Retorque head?

  • johnbgood
  • johnbgood's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 45
  • Thanks: 4

Retorque head?

20 Apr 2011 14:27
#445823
Hi Guys

do I really need to re torque my head on my 1991 KZ1000 police bike after installing and torquing initially?

I have heard pros and cons

Thanks

johnbgood
KZ1000P 1991

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Retorque head?

20 Apr 2011 15:13
#445834
Yes, you really do.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • johnbgood
  • johnbgood's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 45
  • Thanks: 4

Re: Retorque head?

20 Apr 2011 17:42
#445875
How does the factory do it when they build the bike originally? Do they retorque?

Don't get me wrong. I'm going to retorque but was just wondering.

Thanks

Johnbgood
KZ1000P 1991

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: Retorque head?

20 Apr 2011 17:49 - 20 Apr 2011 17:51
#445881
Yes, you absolutely do, and the factory did it too. There are no cons.

The shops had to do it as initial setup if I recall correctly. Just take her out for a spirited blast, then park it for a couple hours, then re-torque. takes like 10 minutes...

Do it.

:laugh:
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)
Last edit: 20 Apr 2011 17:51 by TeK9iNe.

Please Log in or Create an account to join the conversation.

  • stonecold
  • stonecold's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 9
  • Thanks: 0

Re: Retorque head?

20 Apr 2011 19:09
#445897
I recently rechecked the torque on my 30 yr old bike. Was seeing a small seep on the side of the cylinder and a re torque made it stop. Original gasket still in place and no more leak.Amazing how things have a way of backing off with time and settling.

Please Log in or Create an account to join the conversation.

  • fordtruck
  • fordtruck's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 323
  • Thanks: 6

Re: Retorque head?

21 Apr 2011 02:34
#445991
Yes you need to do it. When I rebuilt my motor almost all of the head nuts were loose after the first heat cycle. I checked it again at 500 miles and a few were loose. After that they were fine.
'77 KZ1000-MTC 1075 kit. Stage 1 port

Please Log in or Create an account to join the conversation.

  • johnbgood
  • johnbgood's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 45
  • Thanks: 4

Re: Retorque head?

22 Apr 2011 12:59
#446297
Hi Guys

Thanks for the info. I re-torqued as recommended.

One more question. The APE website has a "Motor Guru" that recommended torquing the heads to 36 ft/lbs.

Anyone ever heard of that?

Thanks again for the advice and info


johnbgood
KZ1000P 1991

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Retorque head?

22 Apr 2011 15:18
#446314
36 ft-lbs sounds about right. I recall the Kawi factory spec is about 30 - 33 ft-lbs. I think the APE studs are stronger so you torque them a bit more.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum