1982 KZ550 Exuast
- Ixer
-
Topic Author
- Offline
- User
-

Registered
- Posts: 40
- Thanks: 0
1982 KZ550 Exuast
21 Apr 2011 14:12
Are there any differences in the LTD and the A model fatory exhausts?
Thanks!
Thanks!
'82 KZ550 A3 - First bike, Attempting to put it back together after sitting for the last 12 or so years.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: 1982 KZ550 Exuast
21 Apr 2011 14:59Ixer wrote: Are there any differences in the LTD and the A model fatory exhausts?
Thanks!
Hello, Ixer, and WELCOME to KZr!
LTD mufflers are bell-shaped at exit.
Standard model has mild reverse cone at exit.
This and lots of good info on kawasaki.com, including parts diagrams, part numbers, models sharing same part, availability, etc.
Here's a link for help with navigating the site and finding information.
kzrider.com/index.php?option=com_kunena&...w&catid=13&id=376734
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- Ixer
-
Topic Author
- Offline
- User
-

Registered
- Posts: 40
- Thanks: 0
Re: 1982 KZ550 Exuast
21 Apr 2011 15:05
But all the mounting points, etc are the same?
My problem is mine are all rusted up (A model) and i found a very nice set for an LTD cheap. I really dont want an aftermarket setup.
Thanks Again.
My problem is mine are all rusted up (A model) and i found a very nice set for an LTD cheap. I really dont want an aftermarket setup.
Thanks Again.
'82 KZ550 A3 - First bike, Attempting to put it back together after sitting for the last 12 or so years.
Please Log in or Create an account to join the conversation.
- mjg15
-
- Offline
- User
-

Registered
- Posts: 698
- Thanks: 18
Re: 1982 KZ550 Exuast
21 Apr 2011 15:16
The thing that may be different is the location of the rear mounting point, but that shouldnt be too hard to fix if it is different. I have had lots of A's and D's (GPz), but I've never tried to fit the LTD exhaust.
'80 Z750fx
'81 KZ550A
'81 GPz550's, Too many!
'82 KZ1000R
'82 GPz750
'90 ZR550
Project photo album: s163.photobucket.com/albums/t289/mg15_ph...GPz-ZR550%20project/
s163.photobucket.com/albums/t289/mg15_ph...current=DSC01286.jpg
'81 KZ550A
'81 GPz550's, Too many!
'82 KZ1000R
'82 GPz750
'90 ZR550
Project photo album: s163.photobucket.com/albums/t289/mg15_ph...GPz-ZR550%20project/
s163.photobucket.com/albums/t289/mg15_ph...current=DSC01286.jpg
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: 1982 KZ550 Exuast
21 Apr 2011 15:22Ixer wrote: But all the mounting points, etc are the same?
My problem is mine are all rusted up (A model) and i found a very nice set for an LTD cheap. I really dont want an aftermarket setup.
Should fit fine.
Might require fabrication of a simple mount to connect from muffler tab to frame.
Usually not a problem. See examples in pic below.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Last edit: 13 Feb 2013 13:01 by martin_csr.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
