GPZ1100 Head

  • notaduc
  • notaduc's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 297
  • Thanks: 3

GPZ1100 Head

21 Apr 2011 19:49
#446139
So, I have a GPZ1100 motor (1984), and am wondering if its worthwhile to swap the head onto my mkII kz1000 motor as I rebuild it.

I have read about the compression drop, wondering if its solved with different pistons?

Or I may just sell it and port my existing head.
1980 (mostly) KZ1000

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: GPZ1100 Head

21 Apr 2011 19:59
#446145
That head will give u a lot more potential.if its in good shape it may be the best option.
u can have custom made pistons. Otto had some made by MTC i think.
if u get your head ported u will have to spend a lot to get it to flow like a stock gpz, and the gps gas 38mm intakes the kz has 36.
compare that to the cost of pistons.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: GPZ1100 Head

22 Apr 2011 00:45
#446225
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • notaduc
  • notaduc's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 297
  • Thanks: 3

Re: GPZ1100 Head

22 Apr 2011 09:03 - 22 Apr 2011 09:05
#446265
Yes, I read that before, thanks.

Doesnt say anything about how to increase the compression ratio, or if the entire rotating assembly swaps.
1980 (mostly) KZ1000
Last edit: 22 Apr 2011 09:05 by notaduc.

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: GPZ1100 Head

23 Apr 2011 22:27
#446593
The MK2 is going to be a pain to convert to a GPZ head Just because of the piston / Cam/ Cam sprocket combination. I put a GPZ head on a "J" motor which is a direct swap. All I had to do is have a set of pistons made. It is not too bad to put it on a pre-1979 engine either because of parts availability. The mark 2 will be a bit more tricky you have to be very careful with what you are doing.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

  • barney
  • barney's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 443
  • Thanks: 36

Re: GPZ1100 Head

23 Apr 2011 23:26
#446620
Notaduc I will buy that gpz head off of you if you dont need it. ;) PM me if you want

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: GPZ1100 Head

24 Apr 2011 11:47
#446715
You and a couple hundred other guys. The last one I bought about three years ago, I payed about $500 for.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

  • notaduc
  • notaduc's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 297
  • Thanks: 3

Re: GPZ1100 Head

24 Apr 2011 13:30
#446735
Yea, in looking around for info, I have seen they fetch a nice price, pretty sure Im just selling it now.
1980 (mostly) KZ1000

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: GPZ1100 Head

24 Apr 2011 14:15
#446748
Custom KZ pistons with late GPZ dome, our cam chain idler installed in the head, and bolt it on.

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: GPZ1100 Head

24 Apr 2011 17:17
#446790
otakar wrote: The MK2 is going to be a pain to convert to a GPZ head Just because of the piston / Cam/ Cam sprocket combination. I put a GPZ head on a "J" motor which is a direct swap. All I had to do is have a set of pistons made. It is not too bad to put it on a pre-1979 engine either because of parts availability. The mark 2 will be a bit more tricky you have to be very careful with what you are doing.

MK11 head is the same as a kz. just needs an idler adaper for a 84 gpz head.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • Jack
  • Jack's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 691
  • Thanks: 7

Re: GPZ1100 Head

24 Apr 2011 17:32
#446795
APE Jay wrote: Custom KZ pistons with late GPZ dome, our cam chain idler installed in the head, and bolt it on.

There you go, right from the source. Jay's pistons will work with the 84 combustion chamber shape. You could probably fund a good portion of modifying your MKll head if you sold the GPZ head, they are getting quite rare. Another source you might consider is Cavanaugh Racing, do a google search.
79 KZ 1075 MKll
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum