spark plug threads

  • Tariq4
  • Tariq4's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 10
  • Thanks: 0

spark plug threads

26 Apr 2011 00:14
#447056
Hi everyone,

I was replacing the spark plugs on my '82 KZ650 CSR. While putting in the last plug, I must have inserted it incorrectly and tried to tighten it too tightly because I can't get the damn thing in more than three quarters of the way in. The threads on the spark plug itself are fine. And I can't get the old spark plug back in more than 3/4 of the way either. So I'm guessing that the inside of the plug is screwed up now and there are some shavings around the area where the plug goes in (and I'm guessing, now in the cylinder). Any solutions? I looked at the Time-Sert solution, but I'm guessing that's only for stripped threads that need an insert -- not a screwed up thread.


Easy to fix? Or am I going to have to replace the cylinder assembly (in other words, sell the bike...)

Thanks,
Tariq

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: spark plug threads

26 Apr 2011 00:18
#447057
Would consider a reverse tap that starts the re-threading at deep end of the hole where the threads are still good.

Does not require removal of the engine head.

Good Fortune! :)

1973 Z1
KZ900 LTD
The following user(s) said Thank You: Tariq4

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum