1979 KZ750 B4
- [email protected]
-
Topic Author
- User
-

Public
- Thanks: 0
1979 KZ750 B4
27 Apr 2011 11:24
I WOULD LIKE TO PUT AN ELECTRONIC IGNITION IN MY 79 KZ750 TWIN, ANY SUGESTIONS
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: 1979 KZ750 B4
27 Apr 2011 12:52 - 27 Apr 2011 14:15
Sure, send me $100 plus shipping and I'll send you the parts you need 
Or buy a KZ440/750 timing advancer, a KZ440/750 igniter, and a KZ440/750 ignition pickup, off eBay, whenever one of each finally appears.
Or get everything but the igniter and build your own igniter following the directions at Lou's page
I'll explain more later, if someone else doesn't do it first.
I'm back.
82-83 (84 in Canada) 750 twins have electronic ignition stock.
81 and newer (unsure about older) KZ440 twins have electronic ignition that also fits the 750 twin.
I have a 750 twin timing advancer, and 440 pickup and igniter on my 750 twin, and formerly had the 440 advancer on it also.
To the best of my knowledge, no aftermarket electronic ignition currently exists. But I think a guy that goes by "KzJim" is/was working on making a kit to sell.
Or you could replace the timing advancer with a 24-1 toothed wheel and use a MegaSquirt to drive the ignition. Someone on here is doing that on a four cylinder KZ.
I'm done
Or buy a KZ440/750 timing advancer, a KZ440/750 igniter, and a KZ440/750 ignition pickup, off eBay, whenever one of each finally appears.
Or get everything but the igniter and build your own igniter following the directions at Lou's page
I'll explain more later, if someone else doesn't do it first.
I'm back.
82-83 (84 in Canada) 750 twins have electronic ignition stock.
81 and newer (unsure about older) KZ440 twins have electronic ignition that also fits the 750 twin.
I have a 750 twin timing advancer, and 440 pickup and igniter on my 750 twin, and formerly had the 440 advancer on it also.
To the best of my knowledge, no aftermarket electronic ignition currently exists. But I think a guy that goes by "KzJim" is/was working on making a kit to sell.
Or you could replace the timing advancer with a 24-1 toothed wheel and use a MegaSquirt to drive the ignition. Someone on here is doing that on a four cylinder KZ.
I'm done
KD9JUR
Last edit: 27 Apr 2011 14:15 by steell.
The following user(s) said Thank You: [email protected]
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: 1979 KZ750 B4
27 Apr 2011 16:58 - 27 Apr 2011 17:02
I recall one of the big guys (Dyna?) makes an "electronic" ignition module for the twins that works with the points. I think it's a basic CD ignition, I think it cost about $60 and you can put it on any points ignition bike. I'll see if I can find it. The points no longer have any current through them so the points last forever. I have had a CDI on my bike since 1982 and points last about 15 years. I think the igniton Steel described is higher performance than CD, but the igniters have been known to fail and it's a long walk home when they do. The CD ignition may fail, but the bike's standard ignition can be quickly restored since the points are still in place and wiring is not altered. On mine, you just unplug it and reverse the plug. I like the CDI, but the full electronic is a little better especially at very high RPM range. If you don't crank it up a lot, doesn't matter.
Here's the Dyna one:
www.dynaonline.com/skins/products/sportbikes/boosters/
Here's the Dyna one:
www.dynaonline.com/skins/products/sportbikes/boosters/
1979 KZ-750 Twin
Last edit: 27 Apr 2011 17:02 by bountyhunter.
The following user(s) said Thank You: [email protected]
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: 1979 KZ750 B4
28 Apr 2011 00:56
I think what you are calling a CDI is actually a transistorized ignition, and you can make one yourself by following the instructions at
Lou's site
A CDI works backwards compared to the points ignition, the coil is permanently grounded and the CDI powers the coil with high voltage to generate the spark. And I think CDI coils are rated at 1 ohm or so.
A CDI works backwards compared to the points ignition, the coil is permanently grounded and the CDI powers the coil with high voltage to generate the spark. And I think CDI coils are rated at 1 ohm or so.
KD9JUR
The following user(s) said Thank You: [email protected]
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
