piston rings
- murr50
-
Topic Author
- Offline
- User
-

Registered
- Posts: 105
- Thanks: 3
piston rings
28 Apr 2011 21:44
So i finally cleaned up my whole engine. She's all shiny, the gaskets all meticulously scraped off, and I'm putting the cylinder sleeves over my pistons..... I placed each piston into their respective sleeve and started easing the unit down. Then it got to a point where the pistons did not want to go any further into the sleeves. I applied what i thought was a small amount of force, and still no movement. So i pull it up and off to look at the pistons. Sure enough, one of the piston rings no longer moves freely the way it used to.
Im assuming this means i need new piston rings, correct? I checked z1, but it doesnt seem they have any in stock. Any other ideas? Just when I thought this was finally going to be the weekend i got to start it up.......
Let this be a lesson in due diligence to all you other rookie do-it-yourselfers
Im assuming this means i need new piston rings, correct? I checked z1, but it doesnt seem they have any in stock. Any other ideas? Just when I thought this was finally going to be the weekend i got to start it up.......
Let this be a lesson in due diligence to all you other rookie do-it-yourselfers
1977 kz650 C
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: piston rings
28 Apr 2011 22:49
If your cylinders are still the standard bore Kawasaki.com says the rings (#13008-059) are still available. Z1E should be able to order for you. Also, here's a guy on eBay that says he's selling an original NOS set:
cgi.ebay.com/ebaymotors/NOS-KAWASAKI-KZ-...fPartsQ5fAccessories
cgi.ebay.com/ebaymotors/NOS-KAWASAKI-KZ-...fPartsQ5fAccessories
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: piston rings
29 Apr 2011 00:58
is the ring broken?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: piston rings
29 Apr 2011 01:36
If the ring isn't broken, you may be able to take it off and flatten it by bending it GENTLY.....
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- murr50
-
Topic Author
- Offline
- User
-

Registered
- Posts: 105
- Thanks: 3
Re: piston rings
29 Apr 2011 21:28
the ring isnt broken.... it just doesnt move freely anymore.. its clearly bent though.. hmmmm i ordered rings today unfortunately haha, but maybe ill have to sell them..
1977 kz650 C
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: piston rings
01 May 2011 20:36
The eBay set sold for $10.50. Did you get them?
cgi.ebay.com/ebaymotors/NOS-KAWASAKI-KZ-...fPartsQ5fAccessories
cgi.ebay.com/ebaymotors/NOS-KAWASAKI-KZ-...fPartsQ5fAccessories
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
