Dead Hole
- Spork53
-
Topic Author
- Offline
- User
-

Registered
- Posts: 4
- Thanks: 0
Dead Hole
04 May 2011 02:06
I recently put new piston rings on my 1983 kz 750 after the reassembly one on the pistons wont run its got great spark you can take the spark plug out and watch it fire, the compression is around 120 opened up the carbs and all the jetting was correct. The weird thing is that either piston 3 or 4 wont fire it changes, their on different coils so that cant be it and the really weird thing is a buddy of mine has the exact same bike and year with the exact same problem. Any ideas on what could cause this?
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Dead Hole
04 May 2011 02:08
are you getting fuel?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Spork53
-
Topic Author
- Offline
- User
-

Registered
- Posts: 4
- Thanks: 0
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Dead Hole
04 May 2011 02:10
is that cylinder trying to fire,is pipe getting warm?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Spork53
-
Topic Author
- Offline
- User
-

Registered
- Posts: 4
- Thanks: 0
Re: Dead Hole
04 May 2011 02:13
No thats how i know its not firing the pipe stays cold, i turn off and on the bike a few times and it changes cylinder between 3 and 4 its really weird
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Dead Hole
04 May 2011 02:24
have you switched plug wires between 1and 4 ,and 2 and 3 to see if it moves?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Dead Hole
04 May 2011 02:38
One possible cause could be a low battery.
Good Fortune!
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Dead Hole
04 May 2011 02:43
would a low battery cause one completely dead cylinder? :blink:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Dead Hole
04 May 2011 03:20 - 04 May 2011 09:23
Would service the battery and charge it overnight, and have battery load tested if possible before re-installation, and assure integrity of ground connection where the negative battery cable attaches to rear of engine, and assure cable connections to battery posts are clean and snug.
Install four brand new spark plugs per factory specs.
And re-test.
Weak ignition due to low battery (or other reason) may result in "running on three" cylinders.
Of course the other reason could be something besides a low battery.
For example, a low battery may cause "running on three cylinders" until the bike's charging system rejuvinates the battery. With a bike having an on-off headlight switch, it often helps to run for a few miles with the headlight turned off so available charging isn't wasted on burning the headlight, and which will more quickly rejuvinate the battery. When again hitting on all four, just turn the headlight back on.
Good Fortune!
Install four brand new spark plugs per factory specs.
And re-test.
Weak ignition due to low battery (or other reason) may result in "running on three" cylinders.
Of course the other reason could be something besides a low battery.
For example, a low battery may cause "running on three cylinders" until the bike's charging system rejuvinates the battery. With a bike having an on-off headlight switch, it often helps to run for a few miles with the headlight turned off so available charging isn't wasted on burning the headlight, and which will more quickly rejuvinate the battery. When again hitting on all four, just turn the headlight back on.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 04 May 2011 09:23 by Patton.
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: Dead Hole
04 May 2011 10:28
Since the problem is on 3 & 4, and not 1 & 4, or 2 & 3, then you can eliminate the pickups, igniter, coils, and plug wires, as the source of the problem, leaving fuel and air(and plugs, but I assume you replace them).
Ever check the valve clearances? I know it's a bit of a reach, but it is possibly the cause of the problem, and if they haven't been checked then they need it anyway.
Ever check the valve clearances? I know it's a bit of a reach, but it is possibly the cause of the problem, and if they haven't been checked then they need it anyway.
KD9JUR
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: Dead Hole
04 May 2011 11:39
You and your friend are both doing the same thing wrong... :evil: sorry!
When you cleaned the carbs, did you blow cleaner through the pilot system from the bottom and visually verify that it was coming out ALL the smal holes in the bore??? This is very important as the smallest obstruction can cause misfire with the initial/stock mixture screw settings.
Good luck!
When you cleaned the carbs, did you blow cleaner through the pilot system from the bottom and visually verify that it was coming out ALL the smal holes in the bore??? This is very important as the smallest obstruction can cause misfire with the initial/stock mixture screw settings.
Good luck!
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: Dead Hole
04 May 2011 14:32
Agreed. And do a compression test - like Steell says, that cylinder might just be very low on compression for a variety of reasons.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
