annd so it begins!!!

  • bearshawk
  • bearshawk's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 253
  • Thanks: 2

annd so it begins!!!

04 May 2011 16:37
#448873
alright guys, my summer plans are do use the spare bike i picked up last november and make it into MY own creation of a 810 street racer. low, light, and of course mean

now my question is, i have a great starter frame/tins and such, but the motor got smashed pretty good on the points cover and messed up the engine case.... aka new engine which is ok, i want to do the 810, would i be better off to find a 750-4 and use that in the conversion or find a new set of cases for a 650, they are dirt cheap... basically im asking

what should i get to START my project, cases, head, and obviously a 810 kit sometime

my start is a 79' 650 SR pics will start coming in droves for all you pic whores when i get back home from school (last final in 1 hour :)!!!)
1978 kz650 sr- long time project/first bike mostly gone
1979 kz659 sr- new acquisition NEXT project GONE

Both 650s combined to make one great bike! with a new powerplant

it is a 79 frame, 78 front end, both 78 wheels and brakes, 78 body work and a 80' 750-4 motor with gpz 750 cams and a kerker and pods :)
1998 honda superhawk 1000-fun in the twisties :)

1982 kz1100 A2 shafty, current project

location:St.Paul

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 845
  • Thanks: 92

Re: annd so it begins!!!

04 May 2011 17:13 - 04 May 2011 17:15
#448881
From the ground up, you would be better off finding a GPZ engine and putting in the 810 kit.

If you want to use your exisiting engine, the best route is to find a set of 1980 750 cylinders and clearence the cases on the 650 to accept them. But if you need cases anyway why not get a set for a 750? Then you might as well track down a gpz enegine at that point. Really the limiting factor in the 650 is the head itself. If you want the most out of the 810cc's your best bet is a properly ported gpz head and nasty set of cams.
If I knew what I was doing all the time life wouldn't be any fun.

'80 KZ650 E 700cc, dyna ignition and coils, frame up restoration, daily driver
'81 KZ1300 A3 full restoration, custom big bore pistons, 1400cc 6 cylinder super bike
"77 KZ650 B1 - Barn Find, work in progeress
"74 Yamaha DT 400 Enduro
Last edit: 04 May 2011 17:15 by Tyler.

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: annd so it begins!!!

04 May 2011 19:28
#448902
900 sleeves in your 650 block B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • bearshawk
  • bearshawk's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 253
  • Thanks: 2

Re: annd so it begins!!!

04 May 2011 23:50
#448958
alright what year GPZ engine?? and is it a direct bolt in???
1978 kz650 sr- long time project/first bike mostly gone
1979 kz659 sr- new acquisition NEXT project GONE

Both 650s combined to make one great bike! with a new powerplant

it is a 79 frame, 78 front end, both 78 wheels and brakes, 78 body work and a 80' 750-4 motor with gpz 750 cams and a kerker and pods :)
1998 honda superhawk 1000-fun in the twisties :)

1982 kz1100 A2 shafty, current project

location:St.Paul

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: annd so it begins!!!

05 May 2011 00:04
#448961
$$$$$$$$$ :laugh:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • bearshawk
  • bearshawk's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 253
  • Thanks: 2

Re: annd so it begins!!!

05 May 2011 00:38
#448974
well i hope that means your gonna donate to the cause?!?

;) i live near an extremely large motorcycle graveyard...literally THOUSANDS of bikes and mostly older jap bikes, so if i can find a gpz engine on the cheap itll be there, and they will take my 650 engine and misc parts in on trade too
1978 kz650 sr- long time project/first bike mostly gone
1979 kz659 sr- new acquisition NEXT project GONE

Both 650s combined to make one great bike! with a new powerplant

it is a 79 frame, 78 front end, both 78 wheels and brakes, 78 body work and a 80' 750-4 motor with gpz 750 cams and a kerker and pods :)
1998 honda superhawk 1000-fun in the twisties :)

1982 kz1100 A2 shafty, current project

location:St.Paul

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: annd so it begins!!!

05 May 2011 00:46
#448975
id bill willing to bet the guys with gpz 750 parts are going to be proud of them compared to 650 parts,just my fearless forecast! :laugh:
its kind of like the hype with the kz1000 mkII cases and cranks,theyre fine if youre building a car tire drag bike.
but for 99% of the high performance builds out there theyre not needed. B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 845
  • Thanks: 92

Re: annd so it begins!!!

05 May 2011 01:10
#448980
Well since he got a smashed up engine and wants to do a hot build on a 650, the gpz is great platform to build a screaming engine. There are lots of options, from 650 to 1100 cc's but realistically a 750 gpz with 810cc's is gonna be pretty straight forward.

Lots of 650 projects use the gpz heads because they have much better flow results, some guys look for the gpz oil pans so they can add an oil cooler, others just want the cams. The point is the gpz engine is just a better overall platform.

I do not belive the engine is a direct bolt in, there is some pretty simple changes to the brackets for the engine mount. Someone who has done this can coment I am sure.

If you go over to kz650.info the bike of the month is a kz650 with a turbo'd gpz engine.
If I knew what I was doing all the time life wouldn't be any fun.

'80 KZ650 E 700cc, dyna ignition and coils, frame up restoration, daily driver
'81 KZ1300 A3 full restoration, custom big bore pistons, 1400cc 6 cylinder super bike
"77 KZ650 B1 - Barn Find, work in progeress
"74 Yamaha DT 400 Enduro

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: annd so it begins!!!

05 May 2011 01:21
#448983
If you use a 83-85 GPz750 motor then you're going to be stuck using either stock offset 630 sprockets or custom offset 530 sprockets. Personally I'd suggest a 650 or 750 bottom end with 83-85 GPz750 cylinder block and head. I've put a 83 GPz750 motor in a 79 KZ650SR.

I have a 750 Turbo motor in the garage if you're really serious about a Turbo motor :evil:
KD9JUR

Please Log in or Create an account to join the conversation.

  • bearshawk
  • bearshawk's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 253
  • Thanks: 2

Re: annd so it begins!!!

05 May 2011 01:58
#448990
o god i would love a turbo sr ;) that would make my life!
1978 kz650 sr- long time project/first bike mostly gone
1979 kz659 sr- new acquisition NEXT project GONE

Both 650s combined to make one great bike! with a new powerplant

it is a 79 frame, 78 front end, both 78 wheels and brakes, 78 body work and a 80' 750-4 motor with gpz 750 cams and a kerker and pods :)
1998 honda superhawk 1000-fun in the twisties :)

1982 kz1100 A2 shafty, current project

location:St.Paul

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum