Valve Adj
- nads.com
-
- Offline
- User
-

Registered
- Posts: 993
- Thanks: 20
Please Log in or Create an account to join the conversation.
- KZ1911
-
Topic Author
- Offline
- User
-

Registered
- Posts: 26
- Thanks: 0
Re: Valve Adj
08 May 2011 10:24 - 08 May 2011 10:26
The idle is low on startup if not stalling, and i turn up the idle then a little.after riding for about 15 min,the idle is back up and very erratic,i adj the air screws a little and adj the idle back down and maybe get it as low as 1200.But is still unstable ,even when i snap the throttle it goes down to about 900 and then eases back up to 1400 to 1600.And sounds unstable all of the time.
I had a kz900 back in the 70,s with a very good idle.Different bike now of course.I know it is a lot older now.But i know it has to be some kind if fix.You got me!
My plug caps are OE.Think that could cause that!?
I had a kz900 back in the 70,s with a very good idle.Different bike now of course.I know it is a lot older now.But i know it has to be some kind if fix.You got me!
My plug caps are OE.Think that could cause that!?
1976 KZ 900.
1973 H1 500
2002 Fatboy 104ci.
1973 H1 500
2002 Fatboy 104ci.
Last edit: 08 May 2011 10:26 by KZ1911.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Valve Adj
08 May 2011 12:49
Thinking valve clearance and/or pilot circuits and/or air leak.
Good Fortune!
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: Valve Adj
08 May 2011 13:29
Agreed - erratic idle most likely cause is leaking air at the manifold boots or something in your pilot/choke circuit. Maybe the choke plungers aren't sealing completely when the choke is off? Spraying WD40 around the manifolds should make any air leaks obvious.
Please Log in or Create an account to join the conversation.
- KZ1911
-
Topic Author
- Offline
- User
-

Registered
- Posts: 26
- Thanks: 0
Re: Valve Adj
08 May 2011 13:42
Thanks guys,i will check for air leaks.Then clean the pilot curcuits with Patton,s diagram.
I will let you know the outcome.
I will let you know the outcome.
1976 KZ 900.
1973 H1 500
2002 Fatboy 104ci.
1973 H1 500
2002 Fatboy 104ci.
Please Log in or Create an account to join the conversation.
- kawman66
-
- Offline
- User
-

Registered
- Posts: 199
- Thanks: 5
Re: Valve Adj
08 May 2011 15:12
really does sound like an air leak.wd 40 will work but carb choke cleaner is better fro fining an air leak
75 z1b
76 kz900ltd
76 kz900
76 kz900-1500
77 kz1000ltd
my drinking team has a racing problem
76 kz900ltd
76 kz900
76 kz900-1500
77 kz1000ltd
my drinking team has a racing problem
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Valve Adj
08 May 2011 15:36
The spray test is of course performed with the engine running, usually at its best steady idle rpm, or slightly higher rpm.
When ingesting outside air through a leak, the outside air becomes part of the air/fuel mixture being provided through the intake valve into the combustion chamber. Which causes a leaner mixture by adding more air.
Spraying WD40, carb cleaner, brake cleaner, propane gas, or whatever, around possible leak sites, allows the product (instead of just outside air) to be ingested.
Ingestion of the product -- unlike outside air -- will usually cause noticeable smoking from the exhaust, and likely a noticeable difference in rpm.
Good Fortune!
When ingesting outside air through a leak, the outside air becomes part of the air/fuel mixture being provided through the intake valve into the combustion chamber. Which causes a leaner mixture by adding more air.
Spraying WD40, carb cleaner, brake cleaner, propane gas, or whatever, around possible leak sites, allows the product (instead of just outside air) to be ingested.
Ingestion of the product -- unlike outside air -- will usually cause noticeable smoking from the exhaust, and likely a noticeable difference in rpm.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Valve Adj
08 May 2011 20:49
Have you done a compression test? Was this running this way before setting the valve clearance?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
