rebuild
- nads.com
-
Topic Author
- Offline
- User
-

Registered
- Posts: 993
- Thanks: 20
rebuild
07 May 2011 03:48
Folks I'm not sending my head to Larry, it's too much of a pain in the I want to ride now. He's busy and I don't want to bother him either. I ended up taking '015 off the head and cutting seats and valves and ported the bejesus out of it. Alot of work it was and I'm getting it done next few days and ready for tags on monday. No new paint yet I do owe you all a picture so I'll snap one when it's painted nexy payday.
My advice is watch out for those damn glass beads.
They are sooo hard to remove, get into everything and stay. I'll degree the cams tomorrow and I'm wondering if the .015 mill will bring the need to clearance the piston pockets? If anyone knows I'll take the advice.
I'll let you all know the lobe centers I end up running and how it all worked soon enough.
Almost put the valves in with the wrong keepers! The ape guides in my old head were shot.
The original kaw guides are good and solid in the head I'm using and tight too.
I honed the ape guides and well ...... don't do that cuz you'll never know how long they last.
Didn't even use a reamer or hone..... don't do that.
Shitty old small engine size boring bars at auto shops..... don't do that either.
The old cylinders were soo far off to one side of the sleeve .... eeeeeeee!
Never checked the bores but.... hey man, do I really want to know?
NO!
So now on to brighter days, a bike isn't near done until the darn thing is almost together, then u can see the light at the end of the tunnel..
2 and some bikes worth of parts laying together is not good. Tools everwhere. What the heck got into me I'll never know.
Long winter, more to learn, got sloppy, realize it now, time to step it up.
Stop it! stop it! Do it right, don't do it any other way.
cuz it aint no fun the other way.
I actually dreaded working on it.
Not anymore.
Now I'm home stretch and once again my head's on straight
So I figure..
My advice is watch out for those damn glass beads.
They are sooo hard to remove, get into everything and stay. I'll degree the cams tomorrow and I'm wondering if the .015 mill will bring the need to clearance the piston pockets? If anyone knows I'll take the advice.
I'll let you all know the lobe centers I end up running and how it all worked soon enough.
Almost put the valves in with the wrong keepers! The ape guides in my old head were shot.
The original kaw guides are good and solid in the head I'm using and tight too.
I honed the ape guides and well ...... don't do that cuz you'll never know how long they last.
Didn't even use a reamer or hone..... don't do that.
Shitty old small engine size boring bars at auto shops..... don't do that either.
The old cylinders were soo far off to one side of the sleeve .... eeeeeeee!
Never checked the bores but.... hey man, do I really want to know?
NO!
So now on to brighter days, a bike isn't near done until the darn thing is almost together, then u can see the light at the end of the tunnel..
2 and some bikes worth of parts laying together is not good. Tools everwhere. What the heck got into me I'll never know.
Long winter, more to learn, got sloppy, realize it now, time to step it up.
Stop it! stop it! Do it right, don't do it any other way.
cuz it aint no fun the other way.
I actually dreaded working on it.
Not anymore.
Now I'm home stretch and once again my head's on straight
So I figure..
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: rebuild
07 May 2011 14:32 - 07 May 2011 14:36
Some earlir threads relating to prospect of nads shipping his engine to LC ---
kzrider.com/forum/2-engine/402564-timing...t=20&start=60#403693
kzrider.com/forum/2-engine/383860-kz1000-head-porti#384552
Some earlier threads relating to glass beading internal engine parts ---
kzrider.com/forum/13-bike-related/417819...case-cleaning#417922
kzrider.com/forum/2-engine/403056-kz1ks-...=20&start=320#405474
Reported superiority of Viton valve seals ---
www.kzrider.com/forum/advsearch?q=viton+valve+seals
kzrider.com/forum/2-engine/402564-timing...t=20&start=60#403693
kzrider.com/forum/2-engine/383860-kz1000-head-porti#384552
Some earlier threads relating to glass beading internal engine parts ---
kzrider.com/forum/13-bike-related/417819...case-cleaning#417922
kzrider.com/forum/2-engine/403056-kz1ks-...=20&start=320#405474
Reported superiority of Viton valve seals ---
www.kzrider.com/forum/advsearch?q=viton+valve+seals
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 07 May 2011 14:36 by Patton.
Please Log in or Create an account to join the conversation.
- 531blackbanshee
-
- Offline
- Vendor
-

Vendors
- Posts: 7442
- Thanks: 796
Re: rebuild
09 May 2011 15:14
get us some pics nads! :whistle:
been wondering where you were.
kinda quite around here without you.
leon
been wondering where you were.
kinda quite around here without you.
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
