Mk11 Valve buckets
- 771000KZ
-
Topic Author
- Offline
- User
-

Registered
- Posts: 98
- Thanks: 0
Mk11 Valve buckets
07 May 2011 16:53
I have about 6 sets of valve shim buckets in a box of parts and I am trying to figure out which are which, there are 3 styles. On the left side there is no provision on them to put in a shim and the middle one has holes drilled thru it? What would that do?
Attachment IMG_1303.JPG not found
Please Log in or Create an account to join the conversation.
- racer54
-
- Offline
- User
-

Registered
- Posts: 1902
- Thanks: 114
Re: Mk11 Valve buckets
07 May 2011 17:19 - 07 May 2011 17:20
The middle ones with the holes are old performance buckets. R.C. Engineering (and maybe others) sold them. They were drilled to make them lighter so the motor could rev higher because of less weight in the valve train. This was before the KZ650 came out and aftermarket companies cam out with the better HD versions. The ones on the left without the provision for shims on top are the type used in a KZ650. Those could be OEM KZ650 or aftermarket buckets...hard to tell. Shims fit under the bucket on top of the retainers. Ones on the right are stock OEM buckets.
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110
Last edit: 07 May 2011 17:20 by racer54.
Please Log in or Create an account to join the conversation.
- 771000KZ
-
Topic Author
- Offline
- User
-

Registered
- Posts: 98
- Thanks: 0
Re: Mk11 Valve buckets
07 May 2011 17:30
so the 650 can be used in a 1000? The box of parts I got are all from a mk11 1000, 1979 motor.
Please Log in or Create an account to join the conversation.
- racer54
-
- Offline
- User
-

Registered
- Posts: 1902
- Thanks: 114
Re: Mk11 Valve buckets
07 May 2011 17:47
Yes...but you have to use the 650 retainers also. The shims sit on top of the retainers instead of the bucket. Recommended to use the shim under buckets (KZ650 style) once you start using cams around .400 lift. Opinions vary on exactly which lift requires the shim under but it's around .400 lift. At that lift the shims on stock 1000 shim on top buckets can spit shim out at higher rpm's. At higher rpm's, the shim can start rocking on top of bucket and can be forced out. When that happens, it usually takes a chunk of the head with it and can cause damage because you now have no shim in bucket.
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110
Please Log in or Create an account to join the conversation.
- 771000KZ
-
Topic Author
- Offline
- User
-

Registered
- Posts: 98
- Thanks: 0
Re: Mk11 Valve buckets
07 May 2011 17:50
ok, cool. thanks. In the box I found a set of andrews 2x so I should be fine using the stock buckets?
Please Log in or Create an account to join the conversation.
- racer54
-
- Offline
- User
-

Registered
- Posts: 1902
- Thanks: 114
Re: Mk11 Valve buckets
07 May 2011 17:51
Yea...actually those would be great for a stock head and valve train. Good combination for a mild street motor.
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110
Please Log in or Create an account to join the conversation.
- 771000KZ
-
Topic Author
- Offline
- User
-

Registered
- Posts: 98
- Thanks: 0
Re: Mk11 Valve buckets
07 May 2011 17:56
yeah, I just finished my project bike which has a 76 900 motor in it. I got all this mark 2 stuff for free including a complete bottom end with undercut gear dogs, welded crank, windage tray and a roller clutch pusher, 71mm bored block and new pistons and rings, just need a head now to finish it off and drop it in. can i use a 77 head on the mark2? I have a couple of those.
Please Log in or Create an account to join the conversation.
- z1kzonly
-
- Offline
- User
-

Registered
- Sustaining Member
- Posts: 2815
- Thanks: 527
Re: Mk11 Valve buckets
07 May 2011 18:00
Yes they do. Cheap dragracer part for the higher lift cams In the big KZ and Z1's.
Cleam em up if you have 8, and sell on ebay. They always sell.
That reminds me, I have a set somewhere.
Cleam em up if you have 8, and sell on ebay. They always sell.
That reminds me, I have a set somewhere.
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Please Log in or Create an account to join the conversation.
- racer54
-
- Offline
- User
-

Registered
- Posts: 1902
- Thanks: 114
Re: Mk11 Valve buckets
07 May 2011 18:19
Yea...the 77 head will fit on the MK11 motor. You just have to be sure which crank you have in there. The MK11 crank uses cam gears with 32T and all other cranks need the 30T cam gears. You have to match these up or the chain will be tool loose or too tight. You have the makings for a good strong motor. As far as the windage tray...some say it is a good thing and others claim it isn't necessary. I wouldn't worry about it as it is just to keep oil off crank while spinning to lessen drag on crank which is supposed to help in HP and let motor rev faster and easier but on a street motor, that isn't a real important issue.
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110
Please Log in or Create an account to join the conversation.
- 771000KZ
-
Topic Author
- Offline
- User
-

Registered
- Posts: 98
- Thanks: 0
Re: Mk11 Valve buckets
07 May 2011 19:37
This is why I love this site. Lots of good info, I built my project bike from a box of parts by asking questions here. And today I took it out for the second time and smoked my buddy on his VN2000. Hehehe. Thanks guys.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
