blocking off tach drive?
- pugeyed
-
Topic Author
- Offline
- User
-

Registered
- Posts: 60
- Thanks: 1
blocking off tach drive?
14 May 2011 05:13
on my current kz750 project its got a tach drive on the head for some sort of speedo/tacho cable?
i need to block this off as i wont be using it.
does anybody do a kit that i can just unscrew the drive and block it off?
Thanks
Mark.
i need to block this off as i wont be using it.
does anybody do a kit that i can just unscrew the drive and block it off?
Thanks
Mark.
kz750 h3 1982 4cl
Please Log in or Create an account to join the conversation.
- 771000KZ
-
- Offline
- User
-

Registered
- Posts: 98
- Thanks: 0
Re: blocking off tach drive?
14 May 2011 21:42
Z1 has them for about 40 bucks, that's where I got mine.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: blocking off tach drive?
14 May 2011 23:41
You can measure the hole, and either get a soft plug, welch plug, etc to drive into the hole, about $1. Or thread the hole for a pipe plug, or the drive itself for a 6mm/ 1/4" bolt. Cheap.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- pugeyed
-
Topic Author
- Offline
- User
-

Registered
- Posts: 60
- Thanks: 1
Re: blocking off tach drive?
15 May 2011 06:53
well i managed to get it to moveits come out about 10mm but doesnt want to come out from the head.
the drive itself moves round and back and to but cant get it to come out the head.
tried looking on cmsnl for a diagram but cant seem to find one.
the drive itself moves round and back and to but cant get it to come out the head.
tried looking on cmsnl for a diagram but cant seem to find one.
kz750 h3 1982 4cl
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: blocking off tach drive?
15 May 2011 08:43pugeyed wrote: well i managed to get it to moveits come out about 10mm but doesnt want to come out from the head.
the drive itself moves round and back and to but cant get it to come out the head.
tried looking on cmsnl for a diagram but cant seem to find one.
Shown on kawasaki.com in this diagram:
Lots of good info on kawasaki.com, including parts diagrams, part numbers, models sharing same part, availability, etc.
Here's a link for help with navigating the site and finding information.
Click > kzrider.com/index.php?option=com_kunena&...w&catid=13&id=376734
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
The following user(s) said Thank You: pugeyed
Please Log in or Create an account to join the conversation.
- pugeyed
-
Topic Author
- Offline
- User
-

Registered
- Posts: 60
- Thanks: 1
Re: blocking off tach drive?
15 May 2011 10:15
ah ha thanks for that, managed to get it out now didnt realise it had a rubber seal on it.
dont know what im going to do to fill the hole as it hasnt got a thread.
Thanks for the link to the kawasaki site, have had a quick look in the past but couldent work out how to get diagrams up.
Cheers Mark.
dont know what im going to do to fill the hole as it hasnt got a thread.
Thanks for the link to the kawasaki site, have had a quick look in the past but couldent work out how to get diagrams up.
Cheers Mark.
kz750 h3 1982 4cl
Please Log in or Create an account to join the conversation.
- baldy110
-
- Offline
- User
-

Registered
- Posts: 2272
- Thanks: 512
Re: blocking off tach drive?
15 May 2011 18:28
I cleaned up # 92087 in the above diagram really well. I then taped the end with duck tape and filled the hole with JB weld epoxy. I let it cure for 12 hours and put it all back together. Did this 20 years ago and have not had a problem with it.
Please Log in or Create an account to join the conversation.
- pugeyed
-
Topic Author
- Offline
- User
-

Registered
- Posts: 60
- Thanks: 1
Re: blocking off tach drive?
16 May 2011 02:38
think i might have to order a new one and do as you say.
someone had been there before me and rounded the thing off.
mind you as long as it pushes in and is oil tight thats all that matters.
Thanks!
someone had been there before me and rounded the thing off.
mind you as long as it pushes in and is oil tight thats all that matters.
Thanks!
kz750 h3 1982 4cl
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
