Rattle at steady speed

  • 771000KZ
  • 771000KZ's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 98
  • Thanks: 0

Rattle at steady speed

14 May 2011 22:28
#451031
I have a 76 900 in my project, I'm getting what sounds like spark knock or valve noise when riding at a steady speed in the 3000-4500 rpm range.

I am running pods and 4 into 1. I also have a dyna 2000 ignition system with dyna coils (2.2) and B8ES plugs.

I had the Dyna on 4 and total timing set to 40*. I'm running 120 mains, 17.5 pilots and the needle on te richest clip. When I first noticed it I reset the timing to 35*. Plugs are nice, just a slight brownish color. I have an APE cam chain tensioner and it's set up properly.

Any ideas? It doesn't matter if the engine is under load or not, meaning I get the rattle in that rev range even if going down hill.

The only thing I haven't checked is valve clearance.

Please Log in or Create an account to join the conversation.

  • Nelson
  • Nelson's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 665
  • Thanks: 16

Re: Rattle at steady speed

14 May 2011 22:32
#451035
If it was me I'd tear my hair out thinking about what's wrong with the engine only to discover later that it's just a loose horn bracket or something like that... :whistle:

could it be?
Restoring and customizing a KZ1000. Click here to read about it.
Plated KTM, DR650, KZ1000, Former MC mechanic (eons ago). 40 yrs. of dirt and street.

Please Log in or Create an account to join the conversation.

  • 771000KZ
  • 771000KZ's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 98
  • Thanks: 0

Re: Rattle at steady speed

14 May 2011 22:33
#451036
I wish, no it's definitly coming from the engine.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Rattle at steady speed

14 May 2011 22:47
#451049
Have you verified that both the 1&4 and 2&3 are set the same? Seeing that it does it even going down hill, which we can only assume is light throttle, maybe the valve train needs inspection. Although this should create noise at Idle. What is the motor set up, compression, and fuel you use. Rattle is not external, like mentioned?
What kind of timing light do you use to check the total advance, and what RPM do you see full total advance?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • 771000KZ
  • 771000KZ's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 98
  • Thanks: 0

Re: Rattle at steady speed

14 May 2011 22:51
#451053
interesting that you ask about 1&4 and 2&3. I notice when I connect to 4 and check the timing it's nice and steady with total timing happening around 3k, but when connected to #3 it seems to bounce around abit when I shoot the timing light. What would cause this? the signal generator is new from the Dyna kit.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Rattle at steady speed

14 May 2011 22:56
#451055
Being all electronic and no moving parts for the advance, I would get with DYNA tech on monday and see if they have a trouble shooting for it. Jumping around maybe a strange feed back through the coil? Just a guess and swapping them around would move the jumping to 1&4 in theory. Don't know what else besides loose mounting for the coils on the plate.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: Rattle at steady speed

14 May 2011 22:57
#451056
are you for sure it is from the engine...

have you gone to your local big hill out in no where and cruised down in free wheel with the engine off
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • 771000KZ
  • 771000KZ's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 98
  • Thanks: 0

Re: Rattle at steady speed

14 May 2011 22:57
#451057
ok, I'll give that a whirl. Thanks man.

Please Log in or Create an account to join the conversation.

  • dshelly
  • dshelly's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 258
  • Thanks: 5

Re: Rattle at steady speed

14 May 2011 23:04
#451061
What are the condition of your coils? Sounds like when you hit over 3K you have a misfire. Would check all connections to be sure something isn't loose.
Occupation:Machinist 25+ exp.
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD

Please Log in or Create an account to join the conversation.

  • 771000KZ
  • 771000KZ's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 98
  • Thanks: 0

Re: Rattle at steady speed

14 May 2011 23:06
#451065
coils are new, bought them from Z1, grey dyna's 2.2 ohms. i'll pull the tank tomorrow and check everything over.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Rattle at steady speed

14 May 2011 23:23
#451067
I was just reviewing this earlier post, kzrider.com/forum/4-electrical/447309-dy...000-ignition-advance , now have you got a timing light with an advance function?
You would need to select the Advance with the dial or digital, to say the curve of 40 degrees, so 40 on your light, then it will line up with TDC mark when revved so full advance travel is achieved.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • 771000KZ
  • 771000KZ's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 98
  • Thanks: 0

Re: Rattle at steady speed

15 May 2011 10:12
#451155
I havea pretty basic timing light. I'm going to try and post a video so you can see what I am seeing.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum