squish at work
- turboguzzi
-
Topic Author
- Offline
- User
-

Registered
- Posts: 852
- Thanks: 75
squish at work
16 May 2011 20:30
to those who were wondering about the point of welding up the combustion chamber edges to create a flat squish band, here's the result....
you can easily see how the squish action blows the mixture across the piston (clean areas). the effect diminishes near the spark plug because the flame front arrives earlier to that edge, before the squishing action happens.
racing on 12:1 on pump gas (albeit 98 octane premium) and so far, no sign of detonation, engine actually runs sort of cool.
seems to work
you can easily see how the squish action blows the mixture across the piston (clean areas). the effect diminishes near the spark plug because the flame front arrives earlier to that edge, before the squishing action happens.
racing on 12:1 on pump gas (albeit 98 octane premium) and so far, no sign of detonation, engine actually runs sort of cool.
seems to work
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: squish at work
16 May 2011 21:06
Right on
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- 531blackbanshee
-
- Offline
- Vendor
-

Vendors
- Posts: 7442
- Thanks: 796
Re: squish at work
17 May 2011 11:10
nice.
always nice to back up theory with facts.
glad it is working out for you.
keep us posted,
leon
always nice to back up theory with facts.
glad it is working out for you.
keep us posted,
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
- turboguzzi
-
Topic Author
- Offline
- User
-

Registered
- Posts: 852
- Thanks: 75
Re: squish at work
17 May 2011 12:58531blackbanshee wrote: nice.
always nice to back up theory with facts.
glad it is working out for you.
keep us posted,
leon
not sure i'll be adding much more to the subject. bottom line is that IMHO, wiseco kit pistons with their flat crown edge simply have no squish area and will tend to detonate if you try to get any reasonable compression with them. welding the head is not a job for the meek but definitely worth it if you can do the work.
TG
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: squish at work
17 May 2011 13:45
Are you using a 83-85 GPz750, or Kz750, head? There is a definite difference between combustion chambers on the two.
KD9JUR
Please Log in or Create an account to join the conversation.
- turboguzzi
-
Topic Author
- Offline
- User
-

Registered
- Posts: 852
- Thanks: 75
Please Log in or Create an account to join the conversation.
- 531blackbanshee
-
- Offline
- Vendor
-

Vendors
- Posts: 7442
- Thanks: 796
Re: squish at work
17 May 2011 15:12turboguzzi wrote:531blackbanshee wrote: nice.
always nice to back up theory with facts.
glad it is working out for you.
keep us posted,
leon
not sure i'll be adding much more to the subject. bottom line is that IMHO, wiseco kit pistons with their flat crown edge simply have no squish area and will tend to detonate if you try to get any reasonable compression with them. welding the head is not a job for the meek but definitely worth it if you can do the work.
TG
tg,
i meant to keep us posted on the progress you make with your bike.
you are preaching to the choir when it comes to me and proper squish.
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
- turboguzzi
-
Topic Author
- Offline
- User
-

Registered
- Posts: 852
- Thanks: 75
Re: squish at work
17 May 2011 15:52531blackbanshee wrote:turboguzzi wrote:531blackbanshee wrote: nice.
always nice to back up theory with facts.
glad it is working out for you.
keep us posted,
leon
not sure i'll be adding much more to the subject. bottom line is that IMHO, wiseco kit pistons with their flat crown edge simply have no squish area and will tend to detonate if you try to get any reasonable compression with them. welding the head is not a job for the meek but definitely worth it if you can do the work.
TG
tg,
i meant to keep us posted on the progress you make with your bike.
you are preaching to the choir when it comes to me and proper squish.
leon
OK, got'ya
keep an eye on the racing section, third update coming soon
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
