KZ440 BOBBER CARB QUESTION

  • bikebldr86
  • bikebldr86's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 7
  • Thanks: 0

KZ440 BOBBER CARB QUESTION

20 May 2011 16:39
#452428
Hey guys i built an 81 kz440 into a bobber. i love how it rides and everything but i have a carb issue. it fires right up no problem, will idle just fine but while im riding it it tends to sputter a little bit and when i pull up to a light or a stop sign it will want to die. ive messed with the idle screw etc, BUT, i have a 1 into 2 conversion with one cr250 carb running it. should i just put a bigger jet in? any help would be great. thanks

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: KZ440 BOBBER CARB QUESTION

20 May 2011 18:33 - 20 May 2011 18:34
#452447
bikebldr86 wrote: ...81 kz440 into a bobber...carb issue. it fires right up no problem, will idle just fine but while im riding it it tends to sputter a little bit and when i pull up to a light or a stop sign it will want to die. ive messed with the idle screw etc, BUT, i have a 1 into 2 conversion with one cr250 carb running it. should i just put a bigger jet in? any help would be great. thanks

If not already done, would first check and assure valve clearances are within specs, as too tight valve clearance may result in failure to idle upon engine attaining normal operating temperature.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 20 May 2011 18:34 by Patton.

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: KZ440 BOBBER CARB QUESTION

20 May 2011 19:25
#452458
I second Pattons recommendation. Make sure your clearances are as close to perfect as possible, as It makes a big difference for exactly what your describing.

Also, tune your mixture screws to the highest idle point, then lean them slightly, like 1/4 turn.

Best of luk

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • bikebldr86
  • bikebldr86's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 7
  • Thanks: 0

Re: KZ440 BOBBER CARB QUESTION

21 May 2011 13:18
#452569
aweesome thank you for the tips. i guess my next question would be what should the valve clearances be? i have looked online and i set them to .008 intake and exhaust according to what ive found. any help would be greatly appreciated

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: KZ440 BOBBER CARB QUESTION

21 May 2011 17:35
#452597
bikebldr86 wrote: aweesome thank you for the tips. i guess my next question would be what should the valve clearances be? i have looked online and i set them to .008 intake and exhaust according to what ive found. any help would be greatly appreciated

For lots of KZ400/440 specs and info, this link should help:

www.armbell.com/forum/index.php?c=6&sid=...571a51a&mforum=kz400

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • bikebldr86
  • bikebldr86's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 7
  • Thanks: 0

Re: KZ440 BOBBER CARB QUESTION

22 May 2011 21:44
#452877
ok so i have adjusted the valves and still have the same issue with the bike wanting to die down coming up to a light. also, i have read that the pick up coil will get too hot and stop working because of this, so you have to let it cool down before it will fire again. what is the remedy for this because it did it to me yesterday. thanks for the help

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: KZ440 BOBBER CARB QUESTION

22 May 2011 23:01
#452919
bikebldr86 wrote: ok so i have adjusted the valves and still have the same issue with the bike wanting to die down coming up to a light. also, i have read that the pick up coil will get too hot and stop working because of this, so you have to let it cool down before it will fire again. what is the remedy for this because it did it to me yesterday. thanks for the help

Wtih valve clearances to specs, other possibilities might include mal-adjusted ignition timing, or a sticking timing advancer.

Dirty carb pilot circuits may also cause these symptoms.

Or carb sync may be way off.

Or pilot circuit adjustment screws may need attention.

Or perhaps idle rpm is set too low.

Are spark plugs fresh and with properly gap?

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum