Issues keeping KZ650 SR
- DannyPike
-
Topic Author
- Offline
- User
-

Registered
- 1978 KZ 650 SR
- Posts: 20
- Thanks: 1
Issues keeping KZ650 SR
20 May 2011 23:58
Ok i bought this 1978 KZ650 sr a few weeks ago. It had carb issues at first like i had explained in a previous post. Now i have it running and at idle and while revving up it sounds and runs nice. However while driving i can get about a mile so and the engine bogs out and stalls. I then have hard time re starting unless i set for a few mins.It drives fine when the engine is still cool but when it seems hot it begins to act up. I know i have a issue with the petcock where it was flooding my crank case, i also had a float sticking which contributed to the flooding. I pluged the vaccum line that runs from the tank to the carb to prevent this. Now the petcock is leaking fuel from around where you spin to reserve and on. I removed and it is pretty dirty an i am going to clean. My question is: is the pet cock my problem why it keeps boging and dieing. or do i have other issues. PLEASE HELP ME!
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Issues keeping KZ650 SR
21 May 2011 00:35DannyPike wrote: Ok i bought this 1978 KZ650 sr a few weeks ago. It had carb issues at first like i had explained in a previous post. Now i have it running and at idle and while revving up it sounds and runs nice. However while driving i can get about a mile so and the engine bogs out and stalls. I then have hard time re starting unless i set for a few mins.It drives fine when the engine is still cool but when it seems hot it begins to act up. I know i have a issue with the petcock where it was flooding my crank case, i also had a float sticking which contributed to the flooding. I pluged the vaccum line that runs from the tank to the carb to prevent this. Now the petcock is leaking fuel from around where you spin to reserve and on. I removed and it is pretty dirty an i am going to clean. My question is: is the pet cock my problem why it keeps boging and dieing. or do i have other issues. PLEASE HELP ME!
Would suspect either fuel starvation (for whatever reason) and/or valve clearances being too tight.
Would also suspect carb overflow circuits are clogged.
A properly functioning vacuum petcock requires vacuum in order to allow fuel flow in the ON or RES position, and is designed to permit fuel flow in the PRI position regardless of vacuum.
If needed, Z1E carries petcock repair kits.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
The following user(s) said Thank You: DannyPike
Please Log in or Create an account to join the conversation.
- DannyPike
-
Topic Author
- Offline
- User
-

Registered
- 1978 KZ 650 SR
- Posts: 20
- Thanks: 1
Re: Issues keeping KZ650 SR
21 May 2011 01:31
i will try and hook up the vacuum line since i got the float from sticking. there is some crud on the screen inside the petcock i am going to clean and try in the am. i will keep all posted i am still open for suggestions.
Please Log in or Create an account to join the conversation.
- Bluemeanie
-
- Offline
- User
-

Registered
- Posts: 2516
- Thanks: 15
Re: Issues keeping KZ650 SR
21 May 2011 09:55
Also try leaving the fuel cap unlocked next run. A clogged vent in the cap will create a vacuum resulting in fuel starvation.
1980 KZ650F1, Bought new out the door for $2,162.98!
Please Log in or Create an account to join the conversation.
- DannyPike
-
Topic Author
- Offline
- User
-

Registered
- 1978 KZ 650 SR
- Posts: 20
- Thanks: 1
Re: Issues keeping KZ650 SR
21 May 2011 23:43
Ok after doing a bunch of hunting i found a guy locally to me and he has about 15 different style kz's that range in years. He had the petcock rebuild kit for my model so i cleaned and rebuilt today. Hooked up (with out the fuel filter it restricts my fuel flow so i need a bigger filter) however i got the vacuum line hooked up and it runs like a dream now. I am planing on repainting in a few weeks or so and i will put pics up. He also had OEM mirrors and i bought the set for 12.00 and the petcock kit was 32.oo I wanted to say thanks again for all the help guys.
Please Log in or Create an account to join the conversation.
- Omaha Rider
-
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Re: Issues keeping KZ650 SR
23 May 2011 00:03
So hooking up the vacuum line that runs from the tank to carbs was the fix? Not trying to be rude, but why didn't you do that in the first place?
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Issues keeping KZ650 SR
23 May 2011 00:51
im thinking that him rebuilding the petcock also helped
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Omaha Rider
-
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Re: Issues keeping KZ650 SR
23 May 2011 12:55
I suppose my question was a stupid one
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
