Tach oil seal
- rcarver
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 0
Tach oil seal
21 May 2011 10:24
Can anyone explain the steps for changing the tach oil seal?
I thought all I had to do was unscrew the knurled nut and pop it out but the old seal is in there good and does not want to come out.
Thanks.
I thought all I had to do was unscrew the knurled nut and pop it out but the old seal is in there good and does not want to come out.
Thanks.
1979 KZ650 SR (aka: Stella Blue)
Please Log in or Create an account to join the conversation.
- dshelly
-
- Offline
- User
-

Registered
- Posts: 258
- Thanks: 5
Re: Tach oil seal
21 May 2011 11:00
After you unhook the cable, unbolt the connector from the head and pull it out. Makes changing the seal much easier plus you can inspect the o-ring that seals it to the head.
Occupation:Machinist 25+ exp.
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
Please Log in or Create an account to join the conversation.
- pugeyed
-
- Offline
- User
-

Registered
- Posts: 60
- Thanks: 1
Re: Tach oil seal
21 May 2011 11:06
mine was stuck in there really good, had to use a slide hammer to pull it out.
gonna make a blank out of a spare bit of alloy, then put a new o ring on it.
gonna make a blank out of a spare bit of alloy, then put a new o ring on it.
kz750 h3 1982 4cl
Please Log in or Create an account to join the conversation.
- rcarver
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 0
Re: Tach oil seal
21 May 2011 11:41 - 21 May 2011 11:42
Thanks guys. I came to the conclusion that I had to take the fitting off the head.
Running to the hardware store for a larger socket. Anyone know the size of that nut? Looked like a 20 or 21mm.
Also z1 was out of the o-rings. Maybe I can get that at the store too. I think it's a 10mm o-ring. Is that right?
Running to the hardware store for a larger socket. Anyone know the size of that nut? Looked like a 20 or 21mm.
Also z1 was out of the o-rings. Maybe I can get that at the store too. I think it's a 10mm o-ring. Is that right?
1979 KZ650 SR (aka: Stella Blue)
Last edit: 21 May 2011 11:42 by rcarver.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Tach oil seal
21 May 2011 11:41 - 21 May 2011 11:43
The old seal may be encrusted, hardened and almost petrified down inside the tach drive housing, requiring careful removal by picking it out in tiny chunks. Be certain to get all of the old seal removed, so the new seal can properly seat in its intended position.
The seal is a small circular rubber ring affair with a tiny coiled spring around it.
The seal is inexpensive, and is available at Z1 Enterprises.
A dental pick or similar tool is handy to scratch out the remains.
Click > www.z1enterprises.com/detail.aspx?ID=1469
A good light and magnifying glass is also helpful.
A properly functioning and sealed tach drive should not leak whatever, even without the tach cable attached.
Good Fortune!
The seal is a small circular rubber ring affair with a tiny coiled spring around it.
The seal is inexpensive, and is available at Z1 Enterprises.
A dental pick or similar tool is handy to scratch out the remains.
Click > www.z1enterprises.com/detail.aspx?ID=1469
A good light and magnifying glass is also helpful.
A properly functioning and sealed tach drive should not leak whatever, even without the tach cable attached.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 21 May 2011 11:43 by Patton.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Tach oil seal
21 May 2011 11:45rcarver wrote: Can anyone explain the steps for changing the tach oil seal? I thought all I had to do was unscrew the knurled nut and pop it out but the old seal is in there good and does not want to come out. Thanks.
Including information about bike year and model may elicit better responses.
And it's easy to put in your signature where it will automatically appear in posted messages.
When done, the signature information appears in all posts, past and future.
And may be changed as often as desired.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- rcarver
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 0
Re: Tach oil seal
21 May 2011 11:47
Thanks Paton,
I have the new seal and I've been digging out the old one with a sharp knife. But I was afraid I wouldn't be able to get all the little pieces. Not to mention I don't see that little retaining spring anywhere on the original.
Thought maybe I would have to take the connector off and get it from the backside.
When I fit the new one does the small spring face the front or rear tire ?
I have the new seal and I've been digging out the old one with a sharp knife. But I was afraid I wouldn't be able to get all the little pieces. Not to mention I don't see that little retaining spring anywhere on the original.
Thought maybe I would have to take the connector off and get it from the backside.
When I fit the new one does the small spring face the front or rear tire ?
1979 KZ650 SR (aka: Stella Blue)
Please Log in or Create an account to join the conversation.
- jacksdad
-
- Offline
- User
-

Registered
- 1979 kz 750 OUCH, IT SPARKED
- Posts: 161
- Thanks: 2
Re: Tach oil seal
21 May 2011 11:49
okay so how about changing the entire tach cable, how would one do that?
1979 kz750 twin cyl.
Please Log in or Create an account to join the conversation.
- rcarver
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 0
Re: Tach oil seal
21 May 2011 11:51 - 21 May 2011 11:52
Oh yeah. It's a 1979 KZ650 SR.
On an iPhone will update profile asap.
On an iPhone will update profile asap.
1979 KZ650 SR (aka: Stella Blue)
Last edit: 21 May 2011 11:52 by rcarver.
Please Log in or Create an account to join the conversation.
- rcarver
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 0
Re: Tach oil seal
21 May 2011 15:33 - 21 May 2011 15:34
thanks guys, I did not realize that the connection to the head just pulls out once you remove the retaining clip.
So I pulled the aluminum connection/seal housing off the head, removed the old seal, and cleaned it out real good.
Now it is time for reassembly. Do I just stick the worm gear in the head? Or is there a particular alignment trick I need to know. It appears to align itself but just wanted to double check.
Oh yeah, Patton good call on the dental picks, really came in handy.
So I pulled the aluminum connection/seal housing off the head, removed the old seal, and cleaned it out real good.
Now it is time for reassembly. Do I just stick the worm gear in the head? Or is there a particular alignment trick I need to know. It appears to align itself but just wanted to double check.
Oh yeah, Patton good call on the dental picks, really came in handy.
1979 KZ650 SR (aka: Stella Blue)
Last edit: 21 May 2011 15:34 by rcarver.
Please Log in or Create an account to join the conversation.
- btchalice
-
- Offline
- User
-

Registered
- Posts: 760
- Thanks: 7
Re: Tach oil seal
22 May 2011 00:24
it aligns itself easy
Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.
Please Log in or Create an account to join the conversation.
- rudedog
-
- Offline
- User
-

Registered
- Posts: 1
- Thanks: 0
Re: Tach oil seal
24 Apr 2012 14:16
Hey guys my 1979 kz750B4 tach. oil seal was in pieces bought a new one but which way does it go back in my repair book didn't help!! so if you guys could help ?
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
