Cam installation problem
- bloglos
-
Topic Author
- Offline
- User
-

Registered
- Posts: 229
- Thanks: 0
Cam installation problem
23 May 2011 12:56
Pulled the head to fix a stripped plug. I made sure to follow the steps in my fsm. Made sure 1 +4 are set to tdc. Put the cams back so the T markers are in the correct position with the correct count on the chain links. But the exhaust cam will not sit correctly as one of the lobes is hitting the bucket keeping it from seating on the head.
Am I doing something wrong? Or does the lobe compress the bucket once the clamps are on and tightened. Sorry if this is a stupid question. Tried using the search but its like a needle in a haystack to find information sometimes.
Am I doing something wrong? Or does the lobe compress the bucket once the clamps are on and tightened. Sorry if this is a stupid question. Tried using the search but its like a needle in a haystack to find information sometimes.
78 KZ650 C2 - Runner
77 KZ650 B1 - Project
77 KZ650 B1 - Project
Please Log in or Create an account to join the conversation.
- z1kzonly
-
- Offline
- User
-

Registered
- Sustaining Member
- Posts: 2815
- Thanks: 527
Re: Cam installation problem
23 May 2011 13:06
That's normal. But, have a helper with you. On the opposite side were you can get the cam cap towers started. Keep them loose, only started.
Then have an extra set oof hands to push down on the other end of the cam that is pushing on the lobes.
This way you can get the other cam tower bolts started.
This is how many cam cap bolts get strippped. Trying to pull down the cap bolts.
Then have an extra set oof hands to push down on the other end of the cam that is pushing on the lobes.
This way you can get the other cam tower bolts started.
This is how many cam cap bolts get strippped. Trying to pull down the cap bolts.
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Please Log in or Create an account to join the conversation.
- bloglos
-
Topic Author
- Offline
- User
-

Registered
- Posts: 229
- Thanks: 0
Re: Cam installation problem
24 May 2011 14:18
Thanks so much! This makes me feel a lot better.
78 KZ650 C2 - Runner
77 KZ650 B1 - Project
77 KZ650 B1 - Project
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: Cam installation problem
25 May 2011 19:33
is the motor still in the bike? if so u can use a long pry bar to push down on it gently. put the bar between the top frame rail and cam cap. be careful not to pull those bolts out on the lower side.
my preferred method is to use long studs made by cutting down some threaded rod. thread the studs in slide the caps over the studs, then use nuts to pull the caps down. then replace the studs 1 at a time with the proper bolts.
my preferred method is to use long studs made by cutting down some threaded rod. thread the studs in slide the caps over the studs, then use nuts to pull the caps down. then replace the studs 1 at a time with the proper bolts.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Cam installation problem
25 May 2011 20:12mark1122 wrote: my preferred method is to use long studs made by cutting down some threaded rod. thread the studs in slide the caps over the studs, then use nuts to pull the caps down. then replace the studs 1 at a time with the proper bolts.
I really like the sound of this approach! I guess that thing on your shoulder isn't just a helmet rack.
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: Cam installation problem
25 May 2011 20:18 - 25 May 2011 20:18
The stud idea is fine, but not necessary, start tightening which cam caps you can and the cam will pull right down where you can thread the remaining caps. Of course some common sense is necessary.
321,000 miles on KZ's that I can remember. Not going to see any more.
Last edit: 25 May 2011 20:18 by RonKZ650.
Please Log in or Create an account to join the conversation.
- bloglos
-
Topic Author
- Offline
- User
-

Registered
- Posts: 229
- Thanks: 0
Re: Cam installation problem
26 May 2011 02:18
Just wanted to thank everyone for their help. Cams when in nice and easy. New new gaskets are in and everything torqued. Carbs are completely rebuilt and back on. Just have to clean out a rusty tank and I'll attempt to fire up this old girl. She's been sleeping for 20 years in a garage. I'll be sure to post a video.
78 KZ650 C2 - Runner
77 KZ650 B1 - Project
77 KZ650 B1 - Project
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Cam installation problem
26 May 2011 09:02
Be sure to put a fuel filter on it if the tank was rusty. It only takes a spec in the wrong place in the carbs to cause a problem. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- bloglos
-
Topic Author
- Offline
- User
-

Registered
- Posts: 229
- Thanks: 0
Re: Cam installation problem
26 May 2011 12:46
Will do. I always keep some inline fuel filters on hand.
78 KZ650 C2 - Runner
77 KZ650 B1 - Project
77 KZ650 B1 - Project
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
