oil pressure light
- n8barton
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
oil pressure light
23 May 2011 13:34 - 23 May 2011 13:35
question- got the bike a month or two ago, changed the oil, now getting it all back together an running, but the oil pressure light keeps flickering. I read in the manual that it will shut off if there is "oil in the lines, or over 1300 rpm." "if there is oil in the lines?" shouldn't there always be oil in the lines? I checked the pressure with a gauge, and it was kind of hard to tell because of the low specification (2psi) on a regualar oil pressure gauge. I took out the oil pump, and checked it with feeler gauges, everything seems fine... I know with cars the next problem then would be crank, connecting rod bearings...- anyone got a suggestion before the bottom end being the cause?
Last edit: 23 May 2011 13:35 by n8barton.
Please Log in or Create an account to join the conversation.
- Kidkawie
-
- Offline
- User
-

Registered
- I bleed premix
- Posts: 1924
- Thanks: 246
Re: oil pressure light
23 May 2011 14:52
Might want to include the year and model or put it in your signature.
1975 Z1 900
1994 KX250 Supermoto
2004 KX125
1994 KX250 Supermoto
2004 KX125
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: oil pressure light
23 May 2011 15:50
Does the oil light only flicker at idle?
What weight oil did you put in?
I know some engines can "swallow air" when you change the oil filter and they start lighting the oil light.
What weight oil did you put in?
I know some engines can "swallow air" when you change the oil filter and they start lighting the oil light.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- n8barton
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
Re: oil pressure light
23 May 2011 15:50 - 23 May 2011 15:54
sorry, 77 kz1000a
and I used 10w 40. Maybe have to "bleed" the air out of the oil pressure switch? it was running fine for very short 2-10 minutes for the last couple of weeks, this just started.
and I used 10w 40. Maybe have to "bleed" the air out of the oil pressure switch? it was running fine for very short 2-10 minutes for the last couple of weeks, this just started.
Last edit: 23 May 2011 15:54 by n8barton. Reason: grammar/content
Please Log in or Create an account to join the conversation.
- Kidkawie
-
- Offline
- User
-

Registered
- I bleed premix
- Posts: 1924
- Thanks: 246
Re: oil pressure light
23 May 2011 16:09
Test the oil pressure switch per your shop manual. Before you dig into the engine I would find a low range pressure gauge and recheck what's coming out of the engine. You should be able to find a 0-10psi guage.
1975 Z1 900
1994 KX250 Supermoto
2004 KX125
1994 KX250 Supermoto
2004 KX125
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: oil pressure light
23 May 2011 16:30
Checked the bulb itself? These bulbs can fail with age. Also look at the electrical contacts in the connectors for corrosion.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- JR
-
- Offline
- Sustaining Member
-

Registered
- Posts: 2981
- Thanks: 501
Re: oil pressure light
23 May 2011 17:57
Any time I have had problems with the oil light coming on it was due to a short at the pressure switch. Try this. Disconnect the lead to the oil pressure switch. Clean well around where the lead connects and put it back. Hoping it is as simple as that.
1980 kz750E1, Delkevic exhaust
Please Log in or Create an account to join the conversation.
- n8barton
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
Re: oil pressure light
23 May 2011 21:47
I don't think it could be the bulb, because the switch creates the ground for the light... right? I will check the switch and get a lighter pressure gauge and give it a try. I cleaned the contact, tightened it up, and it seems the same. I ordered a new filter, will change the oil again (even after running for a total of 20 minutes it was dark and dirty looking so I am thinking that it might of had some sludge build up in the engine, and the new oil change did not help it a ton, so with the pump, pan, new filter, new oil, clean the switch, and the housing see what happens.
Please Log in or Create an account to join the conversation.
- ELCouz
-
- Offline
- User
-

Registered
- Posts: 376
- Thanks: 5
Re: oil pressure light
24 May 2011 13:02
Maybe the pressure switch is defective.
I had to replace mine on my kz550 but it was an oil level sensor not a oil pressure switch though.
They are cheap if bought used on ebay 10-20 $ range...
best regards,
laurent
I had to replace mine on my kz550 but it was an oil level sensor not a oil pressure switch though.
They are cheap if bought used on ebay 10-20 $ range...
best regards,
laurent
1982 KZ810-R1 GPZ with hindle 4-into-1 pipe
Please Log in or Create an account to join the conversation.
- n8barton
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
Re: oil pressure light
15 Jun 2011 18:30
alright, checked it with a low pressure gauge, it fluctates between 2.5 and 0 really fast. I didn't want to run it much, so i shut it off. The oil pump measured within spec on the clearances of the gears and side. what would cause it to be so low......its not like you can replace the bearings like you can on a car, can you?
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
