tuning 1015cc

  • nads.com
  • nads.com's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 993
  • Thanks: 20

tuning 1015cc

23 May 2011 18:39
#453065
I have no way to describe the power increase I got with head porting.

Turned the bike into a rocket. I've ridden v65's and loved the torque and smooth power all the way to 12grand. Fast.

This thing?

Is a whole different animal.

WOW!

It's not even close between the two bikes.

The vbike was a very good running magna my brother owned.

This bike is magic over and beyond anything I've seen out of it yet.

It flat out moves and wants to take your finger tips off the handle bars, leaving the rest of you behind.

And it did it with my own cam timing. At 9000 or 95000 the engine litterly rockets the tack needle past ten and to almost eleven very quick!

And the pull into the next gear is like a slingshot.
Torque is in the house!

Don't get me wrong once your off a stop sighn you don't want to give it a fist full,

You might slide off the back and exceed the speed limit before you can blink!

It's got low, it's got high

It's got voltage.

Every single word is true and nothing blown up out of purportion.

I have no time for stories and lies, they are not exciting

The time is better spent out in the garage porting the kaw head.

never expected that kind of power or even anymore than the engine had.

So my answer to question a?

YES

The key to power on these engines IS the cylinder head.

Last but not least, a 650 speedo is not enough for this bike,

And that's another thrill. Just that you know you can make full use the scale

AND beyond.



By far

If it can breath it can keep making power and the torque turns

MONSTER!!! :evil:

I'm one happy camper folks It takes alot to make me happy

Not anymore.:) :) :)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum