No Compression on any cylinders
- KCsKZ
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
No Compression on any cylinders
23 May 2011 20:16
So my brother brought over a KZ1000 that he wants me to help fix....I'm not a mech by any means but know my way around a garage. I own, ride, and customize my own bike(s) but know nothing of the intricacies of the KZ machines...here are the known issues and initial questions (I do have an owner's manual)
Used the kicker and nearly hyperextended my knee because there was no compression. Put the compression tester on each cylinder and I'm getting no reading at all. Really weird
Took the head off and could see some daylight between the valve and where it seats on the N#1 intake, took it off and it's bent.
Question is, what is the major culprit for one maybe more bent valves and no compression. I assume they are related becasue the previous owner said it just stopped running one day. any advice and input would be appreciated.
Also, good parts source for these valves anyone?
Used the kicker and nearly hyperextended my knee because there was no compression. Put the compression tester on each cylinder and I'm getting no reading at all. Really weird
Took the head off and could see some daylight between the valve and where it seats on the N#1 intake, took it off and it's bent.
Question is, what is the major culprit for one maybe more bent valves and no compression. I assume they are related becasue the previous owner said it just stopped running one day. any advice and input would be appreciated.
Also, good parts source for these valves anyone?
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: No Compression on any cylinders
23 May 2011 20:21
A worn/stretched cam chain can cause the cams to get out of time bending valves/hitting pistons.This is at least one reason the manual cam chain tensioners are so popular:
Cam Chain Tensioners
kzzone.com/tensioners.html
www.kriegercamchaintensioners.com/
Cam Chain Tensioners
kzzone.com/tensioners.html
www.kriegercamchaintensioners.com/
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- z1kzonly
-
- Offline
- User
-

Registered
- Sustaining Member
- Posts: 2815
- Thanks: 527
Re: No Compression on any cylinders
23 May 2011 20:37
Overeving! Missed shift!
Showing off in front of the Bar, leaving, holeshot, powershiftin 2nd with the throttle open! Zing!
Bent valve!
That's how I did a dozen times or so 25-30 yrs ago! :laugh:
Showing off in front of the Bar, leaving, holeshot, powershiftin 2nd with the throttle open! Zing!
Bent valve!
That's how I did a dozen times or so 25-30 yrs ago! :laugh:
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: No Compression on any cylinders
23 May 2011 22:29
It would be very hard to bend valves and render all 4 cylinders without any compression. Assuming the cams are turning with the crank, most likely botched assembly, cams referenced to the wrong marks, bent valves result.
321,000 miles on KZ's that I can remember. Not going to see any more.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: No Compression on any cylinders
23 May 2011 22:35RonKZ650 wrote: It would be very hard to bend valves and render all 4 cylinders without any compression. Assuming the cams are turning with the crank, most likely botched assembly, cams referenced to the wrong marks, bent valves result.
+1 - My money's on botched assembly. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- KCsKZ
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Re: No Compression on any cylinders
29 May 2011 20:23
Thanks for the replies so far. I really appreciate the help. 200 bucks for valves yikes......going to keep searching.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: No Compression on any cylinders
29 May 2011 21:06 - 29 May 2011 21:08
www.z1enterprises.com/detail.aspx?ID=3291
www.z1enterprises.com/detail.aspx?ID=2065
I buy those heads you see for sale on eBay that doesn't have the cam caps. They go cheap and I have a set of valves. Roy
www.z1enterprises.com/detail.aspx?ID=2065
I buy those heads you see for sale on eBay that doesn't have the cam caps. They go cheap and I have a set of valves. Roy
1979 LTD Street Fighter.1977 KZ1000
Last edit: 29 May 2011 21:08 by roy-b-boy-b.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: No Compression on any cylinders
29 May 2011 22:10
I don't see where you have the year/ model. Does it have the Silent Hi-Vo Multiplate cam chain? If so is the Guide in the under side of the valve cover? One I bought had this missing and jumped time, whacking the valves.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
