How do i fix this ?As you can
- Linsk
-
Topic Author
- Offline
- User
-

Registered
- Ron L
- Posts: 89
- Thanks: 1
How do i fix this ?As you can
26 May 2011 17:02
[attachment:1]C:\fakepath\025.JPG[/attachment]
As you can see i have i littte problem. I had a 1075 kit put in buy orient express they did a great job on the motor. The shop that installed the motor let me down in many ways. this is one off them. They broke manafold mount they put a bolt in it and siliconed the broken piece on and didnt tell me about it. I understand things happen but tell me. I rode the bike for 20 plus years it held up but now its time to fix it.My solutions are put bolt back in put piece on and put j b weld on it around outside like the silicone fix. Or fill bolt hole up with j b weld put piece back on and put j b weld on outside for reinforcement than drill and tap. Any ideas would be great.
As you can see i have i littte problem. I had a 1075 kit put in buy orient express they did a great job on the motor. The shop that installed the motor let me down in many ways. this is one off them. They broke manafold mount they put a bolt in it and siliconed the broken piece on and didnt tell me about it. I understand things happen but tell me. I rode the bike for 20 plus years it held up but now its time to fix it.My solutions are put bolt back in put piece on and put j b weld on it around outside like the silicone fix. Or fill bolt hole up with j b weld put piece back on and put j b weld on outside for reinforcement than drill and tap. Any ideas would be great.
1980 KZ 1000 A4 1075 kit 1980 KZ 1000 st 2400 orig miles 1982 GS 1100 E sold 2017 ZX 14R
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: How do i fix this ?As you can
26 May 2011 21:13
picture?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Linsk
-
Topic Author
- Offline
- User
-

Registered
- Ron L
- Posts: 89
- Thanks: 1
Re: How do i fix this ?As you can
26 May 2011 22:34
[attachment:3]C:\fakepath\025.JPG[/attachment]
[attachment:3]C:\fakepath\025.JPG[/attachment]
[attachment:1]C:\fakepath\025.JPG[/attachment]
i tried to send picture but all i got was fakepath attachments. i got my avatar no problem got two pics in gallery. Still a computor rookie. will try tonite. three strike im out
[attachment:3]C:\fakepath\025.JPG[/attachment]
[attachment:1]C:\fakepath\025.JPG[/attachment]
i tried to send picture but all i got was fakepath attachments. i got my avatar no problem got two pics in gallery. Still a computor rookie. will try tonite. three strike im out
1980 KZ 1000 A4 1075 kit 1980 KZ 1000 st 2400 orig miles 1982 GS 1100 E sold 2017 ZX 14R
Please Log in or Create an account to join the conversation.
- Tariff
-
- Offline
- User
-

Registered
- Tariff
- Posts: 19
- Thanks: 0
Re: How do i fix this ?As you can
27 May 2011 00:35
Hello,I haven't seen any pictures yet either and I don't know who OrientExpress is.
But one time when I was about 18 or 19 I put my new Kz down on the right side,kinda hard.Well along with bent front brake levers and some turn signals,I also manage to rip out the electronic ignition and take out a thumbnail size chunk on the edge of the ignition tower.....as I sulked and figured the bike was done for,my brother(who will always be a better mechanic then I ever will)....he rebuilt ,sanded,drilled and tapped the little rear tower that holds down the ignition and filled sanded and painted the thumbnail chunk of the ignition tower/engine case that I broke off.
And yes he used JB Weld.His repair has held and worked flawlessly since 1985.
JB weld was a bike/lifesaver for that problem.
I don't know about OrientExpress,but if they are a shop and they screwed it up,I would think they should fix it properly for thier own rep.....and if you busted it,bring it back and pay them to fix it right.What else can you do,the last thing you need is some failure while your in the middle of a hard launch!!!
But one time when I was about 18 or 19 I put my new Kz down on the right side,kinda hard.Well along with bent front brake levers and some turn signals,I also manage to rip out the electronic ignition and take out a thumbnail size chunk on the edge of the ignition tower.....as I sulked and figured the bike was done for,my brother(who will always be a better mechanic then I ever will)....he rebuilt ,sanded,drilled and tapped the little rear tower that holds down the ignition and filled sanded and painted the thumbnail chunk of the ignition tower/engine case that I broke off.
And yes he used JB Weld.His repair has held and worked flawlessly since 1985.
JB weld was a bike/lifesaver for that problem.
I don't know about OrientExpress,but if they are a shop and they screwed it up,I would think they should fix it properly for thier own rep.....and if you busted it,bring it back and pay them to fix it right.What else can you do,the last thing you need is some failure while your in the middle of a hard launch!!!
1984 KZ700A1 Sports
1977 Triumph T140 "Bonnie 750"
1975 Honda CB400f "SS"
and others...
1977 Triumph T140 "Bonnie 750"
1975 Honda CB400f "SS"
and others...
Please Log in or Create an account to join the conversation.
- btchalice
-
- Offline
- User
-

Registered
- Posts: 760
- Thanks: 7
Re: How do i fix this ?As you can
27 May 2011 00:45
best to take it to a competent welder have them fill the hole completely and re tap
Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.
Please Log in or Create an account to join the conversation.
- Linsk
-
Topic Author
- Offline
- User
-

Registered
- Ron L
- Posts: 89
- Thanks: 1
Re: How do i fix this ?As you can
27 May 2011 01:13
Orient express put a 1075 kit on my motor the shop who installed my engine screwed me .Orient expess is out of long island NY.they built my engine in 1987 still runs strong.the bozos who set it up screwed me like leaving my rear wheel loose.I was young then i do all my work myself. i have a hole list the loose wheel was the last straw.having hard time posting pics i have alot.
1980 KZ 1000 A4 1075 kit 1980 KZ 1000 st 2400 orig miles 1982 GS 1100 E sold 2017 ZX 14R
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: How do i fix this ?As you can
27 May 2011 01:20Linsk wrote: ...having hard time posting pics....
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- Linsk
-
Topic Author
- Offline
- User
-

Registered
- Ron L
- Posts: 89
- Thanks: 1
Re: How do i fix this ?As you can
27 May 2011 22:08
I have windows 7 i just relized i have to make my pics smaller. I just figuare out how to do that. New to the computor.
1980 KZ 1000 A4 1075 kit 1980 KZ 1000 st 2400 orig miles 1982 GS 1100 E sold 2017 ZX 14R
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
