Valve height/lapping

  • 6leafclover
  • 6leafclover's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 89
  • Thanks: 0

Valve height/lapping

29 May 2011 19:14 - 29 May 2011 19:15
#454225
Hey guys quick question,Im getting my head put back together and getting ready do a quick valve lapping job, question is when checking installed valve height as per FSM i can get an idea of what shim to assemble with to start off, but how much change in the valve height should i expect from lapping if checking before and after, Im just going to give them a fast touchup as they sealed well before i took it apart. i just want to get an idea before i dive in because i dont want to have to get all new shims maybe just one or two :dry:
1979 KZ1000-E1/ST
Madison, IN
Last edit: 29 May 2011 19:15 by 6leafclover.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Valve height/lapping

29 May 2011 22:29
#454250
I don't think lapping will move them very much, if you use fine grit compound. If using course compound it could. If they are that bad then re-facing the valves and cutting the seats, probably guides would be in order.
Use the book, watch the seat width, and margin for the valve.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • 6leafclover
  • 6leafclover's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 89
  • Thanks: 0

Re: Valve height/lapping

29 May 2011 22:47
#454255
Thanks, I was thinking it couldent change all that much, the seats and valve faces neither are really bad at all just want to give them a quick hit with the lapper to be safe, will use fine compound for sure.
1979 KZ1000-E1/ST
Madison, IN

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum