Pulse Coil
- SlowRoad
-
Topic Author
- Offline
- User
-

Registered
- Posts: 28
- Thanks: 0
Pulse Coil
31 May 2011 22:56 - 31 May 2011 22:58
I am kind of a lurker to the site. I check the board every now and then and catch up on my favorite builds. I need some help finding a part for my project.
Where can I find a decent price on pulse coils for an 83 KZ1100a3 shaft. The rear one on my bike is going in and out. Out mostly. I really don't want to spend a bunch on them if I can find a good used one around as I am doing a low budget "cheap;) " build.
Thanks
Tim
Where can I find a decent price on pulse coils for an 83 KZ1100a3 shaft. The rear one on my bike is going in and out. Out mostly. I really don't want to spend a bunch on them if I can find a good used one around as I am doing a low budget "cheap;) " build.
Thanks
Tim
1981 KZ1100-A1 Shaft
1997 Valkyrie GL1500
1998 KLR650
1978 KZ750-B Twin
1997 Valkyrie GL1500
1998 KLR650
1978 KZ750-B Twin
Last edit: 31 May 2011 22:58 by SlowRoad.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Pulse Coil
31 May 2011 23:54 - 01 Jun 2011 00:11
I looked a bit, don't see many with the plate and both coils for under $100 used.
Fits the 1000 and 1100 from 79 up with electronic ignition. There is a couple of guy's here parting out in the "For Sale" maybe shoot a PM.
The part was superseded at Kawasaki with #59026-1133 as the new #.
Fits the 1000 and 1100 from 79 up with electronic ignition. There is a couple of guy's here parting out in the "For Sale" maybe shoot a PM.
The part was superseded at Kawasaki with #59026-1133 as the new #.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Last edit: 01 Jun 2011 00:11 by Motor Head.
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Pulse Coil
01 Jun 2011 00:08
Ohm Checking Pickup(Pulsing) Coils
The pickup coils on the Kawasaki’s with the factory supplied electronic ignition can sometimes fail or become intermittent due to heat and vibration.
1.Trace back from where the pick up coils are mounted,(under a right side CD sized cover) locate and disconnect a small 4 pin connector. Using a multi-meter set on OHMS and range of 2K, check between the BLUE and BLACK wires(#1 and #4 sparkplug wires) for between 360- 540 OHMS.
2.For #2 and #3 sparkplugs the wire colors will be YELLOW and RED, again 360-540 OHMS. The 550’s,650’s & 750’s may be backwards to the Z1’s,Kz900’s,Kz1000’s & Kz1100’s.
3.If the pickup coils are suspect of failing due to heat, they can be stressed using a hair dryer without the need of the engine running.
4.A replacement set of pickup coils might be obtained from a dealer who serviced the police Kawasaki’s.
5. If replacement pickup coils are not available, your next choice would be to order a Dyna “S” electronic ignition system from www.z1enterprises.com It replaces the IC igniter with a smaller module located where the mechanical ignition advancer was mounted.
6. Checking with Kawasaki.com website has determined that the Pick up(pulsing) coils are available . The pulsing coil # is 59026-1133 and replaces the older # 1002, 1012 which were used from the MKII motors until the 2005 P24.
7.Check the small 4 pin connector that the pickup coils connect to for corrosion/loose pins too.
The pickup coils on the Kawasaki’s with the factory supplied electronic ignition can sometimes fail or become intermittent due to heat and vibration.
1.Trace back from where the pick up coils are mounted,(under a right side CD sized cover) locate and disconnect a small 4 pin connector. Using a multi-meter set on OHMS and range of 2K, check between the BLUE and BLACK wires(#1 and #4 sparkplug wires) for between 360- 540 OHMS.
2.For #2 and #3 sparkplugs the wire colors will be YELLOW and RED, again 360-540 OHMS. The 550’s,650’s & 750’s may be backwards to the Z1’s,Kz900’s,Kz1000’s & Kz1100’s.
3.If the pickup coils are suspect of failing due to heat, they can be stressed using a hair dryer without the need of the engine running.
4.A replacement set of pickup coils might be obtained from a dealer who serviced the police Kawasaki’s.
5. If replacement pickup coils are not available, your next choice would be to order a Dyna “S” electronic ignition system from www.z1enterprises.com It replaces the IC igniter with a smaller module located where the mechanical ignition advancer was mounted.
6. Checking with Kawasaki.com website has determined that the Pick up(pulsing) coils are available . The pulsing coil # is 59026-1133 and replaces the older # 1002, 1012 which were used from the MKII motors until the 2005 P24.
7.Check the small 4 pin connector that the pickup coils connect to for corrosion/loose pins too.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- SlowRoad
-
Topic Author
- Offline
- User
-

Registered
- Posts: 28
- Thanks: 0
Re: Pulse Coil
01 Jun 2011 12:11
Thanks for the responses. I will check out the for sale posts.
I did the testing from the KZ1100 manual. That's how I tracked down the pulse coil. I was surprised as to how much troubleshooting info there was in there.
I did the testing from the KZ1100 manual. That's how I tracked down the pulse coil. I was surprised as to how much troubleshooting info there was in there.
1981 KZ1100-A1 Shaft
1997 Valkyrie GL1500
1998 KLR650
1978 KZ750-B Twin
1997 Valkyrie GL1500
1998 KLR650
1978 KZ750-B Twin
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Pulse Coil
01 Jun 2011 20:46
Could you tell me the color of the wires and how many wires on the unit? I have a couple of stock units. Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Pulse Coil
01 Jun 2011 22:30
Blue and Black for one side, Red and Yellow for the other one. Should read 360-540 ohms.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- SlowRoad
-
Topic Author
- Offline
- User
-

Registered
- Posts: 28
- Thanks: 0
Re: Pulse Coil
02 Jun 2011 00:20
That is correct, and the wires are about 2 feet long with a 4 wire plug.
1981 KZ1100-A1 Shaft
1997 Valkyrie GL1500
1998 KLR650
1978 KZ750-B Twin
1997 Valkyrie GL1500
1998 KLR650
1978 KZ750-B Twin
Please Log in or Create an account to join the conversation.
- loudhvx
-
- Offline
- KZr Legend
-

Registered
- Posts: 10863
- Thanks: 1622
Re: Pulse Coil
02 Jun 2011 01:05
If that uses a mechanical advancer, then it should still be available from Kawasaki because they were used on the police bikes for decades (info from Otto). Not that they would be cheap from kawasaki, but maybe NOS units will show up on ebay?
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.
Kz550 valve train warning.
Other links.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Pulse Coil
02 Jun 2011 22:54
I can't find it. I know I have one. I found a yamaha unit and a dyna unit. I have anothe dyna and the stock unit stashed some where.
I am shipping all my KZ parts to Australia and my shop is a mess.
I'll look again. Roy
I am shipping all my KZ parts to Australia and my shop is a mess.
I'll look again. Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- SlowRoad
-
Topic Author
- Offline
- User
-

Registered
- Posts: 28
- Thanks: 0
Re: Pulse Coil
03 Jun 2011 16:06
Roy, Thanks for the reply. I found a used unit yesterday for a decent price at a local salvage yard, so she is running again.
Thanks for all the replys and help.
Tim
Thanks for all the replys and help.
Tim
1981 KZ1100-A1 Shaft
1997 Valkyrie GL1500
1998 KLR650
1978 KZ750-B Twin
1997 Valkyrie GL1500
1998 KLR650
1978 KZ750-B Twin
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
