kz drag bike need help please
- wickedbiker
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
kz drag bike need help please
01 Jun 2011 21:35
ok i need some help here. im building a kz1170 motor with j head, 410 cams, 33mm smoothbore carbs, mickey thompson 25/7/18 rear tire gpz trans my front sprocket is 15 tooth im trying to figure out what rear sprocket size i should be running. ive been told to run a 40 to 46 tooth, i dont know which one to go with??? i run 1/4 mile tracks..
Please Log in or Create an account to join the conversation.
- etbike3135
-
- Offline
- User
-

Registered
- Posts: 379
- Thanks: 50
Re: kz drag bike need help please
01 Jun 2011 21:39
You have my combination exactly! I run 14 46 gearing. I know thats high but the J/GPZ trans has different ratios and the top gear is more of a 1 to 1 then the more common KZ. I run anywhere from 9.7 to 9.4 and about 130 to 136. Your going to have a hard time running a 50 tooth rear sprocket with the 15 front or youll just have to run it as a 4 speed (good for bottom bulb).
1973 Kawasaki Z1
18 years in dragbikes
18 years in dragbikes
The following user(s) said Thank You: wickedbiker
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: kz drag bike need help please
01 Jun 2011 21:49
You will probably get a bunch of replys such as "I use yada yada". Just because someone used a certain gear, does not mean it is what you should be using.
Check this out; quarterjr.com/quarter_jr.htm
We used to sell this. You can put your bike in there and run it down the track and see what it turns. This thing is surprisingly accurate. You can then change sprocket ratios until you see what really works best on your bike. Then spend your money.
This thing even lets you change launch RPM, gear change RPM, etc Instead of wearing out the bike learning to make it go fast, you can pretty much ball park it on your PC.
Check this out; quarterjr.com/quarter_jr.htm
We used to sell this. You can put your bike in there and run it down the track and see what it turns. This thing is surprisingly accurate. You can then change sprocket ratios until you see what really works best on your bike. Then spend your money.
This thing even lets you change launch RPM, gear change RPM, etc Instead of wearing out the bike learning to make it go fast, you can pretty much ball park it on your PC.
Please Log in or Create an account to join the conversation.
- wickedbiker
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Please Log in or Create an account to join the conversation.
- wickedbiker
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Re: kz drag bike need help please
01 Jun 2011 21:54
k thank you jay i buy alot of parts from yall lol
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
