Headlight whine
- staniel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 184
- Thanks: 5
Headlight whine
05 Jun 2011 18:55
A pretty strange thing going on here. I really wish I knew more about electrical diagnosis. I'm afraid I have a short or something, but I have no idea where to start, so I thought I'd consult the geniuses.
I've started trading out parts from my parts bike (an identical 1983 kz750 L3). Got the gauge cluster hooked up yesterday, and had to take the headlight out to do so.
Now, strangely, the headlight whines when the ignition is turned on, and the beam is dim. I checked the voltage and it was somewhere around 4 volts. The other plug, when the high beams were off, was around 12 volts.
If I switch the high beam on, the whine goes away, the brightness is fine, and the voltage at both plugs is fine - around 12 volts again.
Still in love with this forum,
Staniel
I've started trading out parts from my parts bike (an identical 1983 kz750 L3). Got the gauge cluster hooked up yesterday, and had to take the headlight out to do so.
Now, strangely, the headlight whines when the ignition is turned on, and the beam is dim. I checked the voltage and it was somewhere around 4 volts. The other plug, when the high beams were off, was around 12 volts.
If I switch the high beam on, the whine goes away, the brightness is fine, and the voltage at both plugs is fine - around 12 volts again.
Still in love with this forum,
Staniel
1983 KZ750 L3 with 4-1 Kerker pipe and pods
1983 KZ750 L3 parts bike
1983 KZ750 L3 parts bike
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Headlight whine
05 Jun 2011 20:49
A whine sounds like a resistive connection somewhere maybe at the plug or ground connection. Does yours have a relay in circuit? They can make a chattering noise.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- staniel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 184
- Thanks: 5
Re: Headlight whine
06 Jun 2011 01:12
The head lamp used to work and, as far as I know, all I've done is unplug the plugs and replug them. For a long time no lights were working because I had left the brown wire unattached.
Had to drive home from a date in the dark with no lights!
Anyway, no, there shouldn't be anything resistive in there, and the hum is coming from behind the light, as far as I can tell. I'm gonna pull the light out tomorrow and try to locate the problem by sound.
If anyone has tips of what to poke with a multimeter, I would love to hear them. Reserve lighting device? (Does every light go through this box?) Left hand controls? Fuse box?
Had to drive home from a date in the dark with no lights!
Anyway, no, there shouldn't be anything resistive in there, and the hum is coming from behind the light, as far as I can tell. I'm gonna pull the light out tomorrow and try to locate the problem by sound.
If anyone has tips of what to poke with a multimeter, I would love to hear them. Reserve lighting device? (Does every light go through this box?) Left hand controls? Fuse box?
1983 KZ750 L3 with 4-1 Kerker pipe and pods
1983 KZ750 L3 parts bike
1983 KZ750 L3 parts bike
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Headlight whine
06 Jun 2011 04:36
By resistive, I meant a loose or corroded connection, loose connector in the harness, something like that.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- staniel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 184
- Thanks: 5
Re: Headlight whine
07 Jun 2011 21:10
I'm gonna open it up and try to pinpoint the squeal by sound. If I can't find it, I'll cry, and then I'll just drive to SF with my brights on. I wish I were better at electronics.
1983 KZ750 L3 with 4-1 Kerker pipe and pods
1983 KZ750 L3 parts bike
1983 KZ750 L3 parts bike
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
