HIGH IDLE

  • 75Z1-B
  • 75Z1-B's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 2
  • Thanks: 0

HIGH IDLE

05 Jun 2011 21:15
#455672
ok, so it's been 12 years since the bike has been drove. Carbs just cleaned and syncro etc.

When I take the bike out for a pretty good run and it gets warmed up real nice it works good except for when I come to a stop it stays high on an idle, I have to flip the choke up and down and it will settle down. I have frigged with the idle and the air screws etc...??? It seems to spit and sputter a bit when I first take off on a cold engine but it idles fine when i stop. Seems the hotter the bike gets the better it works but then it wont idle down. I checked for air leaks etc???? Would rebuilding the carbs maybe fix this.??? Any ideas?.:dry:
ON THE 7th DAY GOD CREATED THE Z1
ON THE 8th DAY I BOUGHT ONE
36 YEARS LATER
IT'S ALIVE

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: HIGH IDLE

05 Jun 2011 23:04
#455683
A classic air leak symptom. Your going to have to check a little better... :)

Try removing the carb to engine boots and clean the mounting surfaces really well, then use a gasoline resistant sealer like Permatex Motoseal (gray tube), and apply a thin coat with your finger to both surfaces, then re-assemble.

Smear a light coat of grease around both ends of the carbs before reinstalling, and use good hose clamps to ensure that no air can get in anywhere.

Dont forget to lube your advancer... valve clearances are ok? compression hot??

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum